Hovatek Forum MOBILE Android [Please help] Read Error Sp Flash Tool Redmi Note 10s
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Read Error Sp Flash Tool Redmi Note 10s

[Please help] Read Error Sp Flash Tool Redmi Note 10s

suarezfco
suarezfco
suarezfco
Newbie
4
13-12-2021, 02:28 AM
#1



Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.

I want to change the rom to the global version to enable the sim2 and remove all junk apps.
I would be very grateful if you could help me.

I understand that before making any changes, you should always try to backup the Rom and imei in case they get lost.

I am trying to do the backup, but so far I have not succeeded.
I am using WWR MTK 2.51 tool to create the scatter file and SP Flash tool to read the rom, but it gives me an error.

Me sale este error

Error 0xC0030004

Mensaje: ERROR: STATUS_PRELOADER_INVALID 0xC0030004

Significado: hay un problema con el nombre de la partición del precargador en el archivo de dispersión o la comunicación con el dispositivo.

Intento esto pero no funciona

Solución:
Intente cargar el precargador desde el firmware de su modelo antes de intentar cualquier operación. (el error continúa).

Edite el archivo de dispersión preferiblemente usando Notepad ++ o cualquier otro buen editor de texto, luego cambie el nombre de la partición a minúsculas, p. PRELOADER al precargador o para que coincida con el nombre de archivo exacto en el firmware y luego guarde el archivo de dispersión. (el error continúa).

Intente mantener presionado el botón Vol UP o Down antes de conectar el teléfono a la PC. (el error continúa).

Si obtiene el error al intentar leer, presione control + alt + v para habilitar el modo avanzado en la herramienta flash SP, luego en la pestaña de lectura, marque la casilla de verificación para SRAM y luego vuelva a intentar la operación de lectura. (No se como hacerlo, no veo la opcion)
Attached Files
.jpg
Bypass Redmi Note 10s.JPG
Size: 124.55 KB / Downloads: 8
.jpg
Error 0xc0030004.JPG
Size: 75.03 KB / Downloads: 5
hovatek
hovatek
hovatek
Administrator
49,570
13-12-2021, 08:23 AM
#2
(13-12-2021, 02:28 AM)suarezfco Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.

I want to change the rom to the global version to enable the sim2 and remove all junk apps.
I would be very grateful if you could help me.

....

Already replied @ https://www.hovatek.com/forum/thread-411...#pid222751
While SP flash tool is open, hold Ctrl + Alt + V . You should see more options. check under the readback tab and change from DRAM to SRAM
This post was last modified: 13-12-2021, 08:26 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
suarezfco
suarezfco
suarezfco
Newbie
4
14-12-2021, 03:37 AM
#3
(13-12-2021, 08:23 AM)hovatek
(13-12-2021, 02:28 AM)suarezfco Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.

I want to change the rom to the global version to enable the sim2 and remove all junk apps.
I would be very grateful if you could help me.

....

Already replied @ https://www.hovatek.com/forum/thread-411...#pid222751
While SP flash tool is open, hold Ctrl + Alt + V . You should see more options. check under the readback tab and change from DRAM to SRAM

Thaks for your reply sir.

this method worked for me https://www.hovatek.com/forum/thread-411...#pid222751.

here the log:

Port - Device detected Smile
Preloader - CPU: MT6785(Helio G90)
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10212000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x813
Preloader - Target config: 0xe7
Preloader - SBC enabled: True
Preloader - SLA enabled: True
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca00
Preloader - SW Ver: 0x0
Preloader - ME_ID:
Preloader - SOC_ID: F49408153D2B19836C9C111D764855E75629183E54E44475DB3E7F4D57A9CE99
PLTools - Loading payload from mt6785_payload.bin, 0x264 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: C:\Users\suare\Downloads\Xiaomi\MTK Cliente\mtkclient-main\mtkclient\payloads\mt6785_payload.bin
Port - Device detected Smile
DA_handler - Device is protected.
DA_handler - Device is in BROM mode. Trying to dump preloader.
-8Successfully extracted preloader for this device to: C:\Users\suare\Downloads\Xiaomi\MTK Cliente\mtkclient-main\mtkclient\Loader\Preloader\preloader_k85v1_64.bin
DAXFlash - Uploading xflash stage 1 from MTK_AllInOne_DA_5.2136.bin
DAXFlash - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXFlash - Successfully received DA sync
DAXFlash - UFS FWVer: 0x2020
DAXFlash - UFS Blocksize:0x1000
DAXFlash - UFS ID: MT128GASAO4U21
DAXFlash - UFS CID: 2c014d54313238474153414f34553231
DAXFlash - UFS LU0 Size: 0x1dcb000000
DAXFlash - UFS LU1 Size: 0x400000
DAXFlash - UFS LU2 Size: 0x400000
DAXFlash - DRAM config needed for : 2c014d54313238474153414f34553231
DAXFlash - Sending emi data ...
DAXFlash - Sending emi data succeeded.
DAXFlash - Uploading stage 2...
DAXFlash - Successfully uploaded stage 2
DAXFlash - UFS FWVer: 0x2020
DAXFlash - UFS Blocksize:0x1000
DAXFlash - UFS ID: MT128GASAO4U21
DAXFlash - UFS CID: 2c014d54313238474153414f34553231
DAXFlash - UFS LU0 Size: 0x1dcb000000
DAXFlash - UFS LU1 Size: 0x400000
DAXFlash - UFS LU2 Size: 0x400000
DAXFlash - DA-CODE : 0x131B0
DAXFlash - DA Extensions successfully added
DA_handler - Requesting available partitions ....
DA_handler
DA_handler - [LIB]: ←[31mError: Couldn't detect partition: boot *******(this is the only error that i see)********
Available partitions:←[0m
DA_handler - misc
DA_handler - countrycode
DA_handler - para
DA_handler - expdb
DA_handler - gsort
DA_handler - ffu
DA_handler - cust
DA_handler - blk1
DA_handler - rescue
DA_handler - frp
DA_handler - nvcfg
DA_handler - nvdata
DA_handler - vbmeta_a
DA_handler - vbmeta_system_a
DA_handler - vbmeta_vendor_a
DA_handler - vbmeta_b
DA_handler - vbmeta_system_b
DA_handler - vbmeta_vendor_b
DA_handler - md_udc
DA_handler - metadata
DA_handler - persist
DA_handler - protect1
DA_handler - protect2
DA_handler - seccfg
DA_handler - otp
DA_handler - md1img_a
DA_handler - spmfw_a
DA_handler - audio_dsp_a
DA_handler - scp_a
DA_handler - sspm_a
DA_handler - cam_vpu1_a
DA_handler - cam_vpu2_a
DA_handler - cam_vpu3_a
DA_handler - gz_a
DA_handler - lk_a
DA_handler - boot_a
DA_handler - vendor_boot_a
DA_handler - dtbo_a
DA_handler - tee_a
DA_handler - sec1
DA_handler - proinfo
DA_handler - efuse
DA_handler - nvram
DA_handler - boot_para
DA_handler - logo
DA_handler - md1img_b
DA_handler - spmfw_b
DA_handler - audio_dsp_b
DA_handler - scp_b
DA_handler - sspm_b
DA_handler - cam_vpu1_b
DA_handler - cam_vpu2_b
DA_handler - cam_vpu3_b
DA_handler - gz_b
DA_handler - lk_b
DA_handler - boot_b
DA_handler - vendor_boot_b
DA_handler - dtbo_b
DA_handler - tee_b
DA_handler - super *******( Is Big 8.5 GB)*****
DA_handler - userdata ******( Is big 7.7 Gb)*****
DA_handler - flashinfo

My question is. What part of the rom is really important to backup?
Abdulakeem14
Abdulakeem14
Abdulakeem14
Senior Member
1,757
14-12-2021, 05:36 PM
#4
(14-12-2021, 03:37 AM)suarezfco
(13-12-2021, 08:23 AM)hovatek
(13-12-2021, 02:28 AM)suarezfco Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.

I want to change the rom to the global version to enable the sim2 and remove all junk apps.
I would be very grateful if you could help me.

....

Already replied @ https://www.hovatek.com/forum/thread-411...#pid222751
While SP flash tool is open, hold Ctrl + Alt + V . You should see more options. check under the readback tab and change from DRAM to SRAM

Thaks for your reply sir.

this method worked for me https://www.hovatek.com/forum/thread-411...#pid222751.

here the log:

Port - Device detected Smile
Preloader - CPU: MT6785(Helio G90)
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10212000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x813
Preloader - Target config: 0xe7
Preloader - SBC enabled: True
Preloader - SLA enabled: True
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca00
Preloader - SW Ver: 0x0
Preloader - ME_ID:
Preloader - SOC_ID: F49408153D2B19836C9C111D764855E75629183E54E44475DB3E7F4D57A9CE99
PLTools - Loading payload from mt6785_payload.bin, 0x264 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: C:\Users\suare\Downloads\Xiaomi\MTK Cliente\mtkclient-main\mtkclient\payloads\mt6785_payload.bin
Port - Device detected Smile
DA_handler - Device is protected.
DA_handler - Device is in BROM mode. Trying to dump preloader.
-8Successfully extracted preloader for this device to: C:\Users\suare\Downloads\Xiaomi\MTK Cliente\mtkclient-main\mtkclient\Loader\Preloader\preloader_k85v1_64.bin
DAXFlash - Uploading xflash stage 1 from MTK_AllInOne_DA_5.2136.bin
DAXFlash - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXFlash - Successfully received DA sync
DAXFlash - UFS FWVer: 0x2020
DAXFlash - UFS Blocksize:0x1000
DAXFlash - UFS ID: MT128GASAO4U21
DAXFlash - UFS CID: 2c014d54313238474153414f34553231
DAXFlash - UFS LU0 Size: 0x1dcb000000
DAXFlash - UFS LU1 Size: 0x400000
DAXFlash - UFS LU2 Size: 0x400000
DAXFlash - DRAM config needed for : 2c014d54313238474153414f34553231
DAXFlash - Sending emi data ...
DAXFlash - Sending emi data succeeded.
DAXFlash - Uploading stage 2...
DAXFlash - Successfully uploaded stage 2
DAXFlash - UFS FWVer: 0x2020
DAXFlash - UFS Blocksize:0x1000
DAXFlash - UFS ID: MT128GASAO4U21
DAXFlash - UFS CID: 2c014d54313238474153414f34553231
DAXFlash - UFS LU0 Size: 0x1dcb000000
DAXFlash - UFS LU1 Size: 0x400000
DAXFlash - UFS LU2 Size: 0x400000
DAXFlash - DA-CODE : 0x131B0
DAXFlash - DA Extensions successfully added
DA_handler - Requesting available partitions ....
DA_handler
DA_handler - [LIB]: ←[31mError: Couldn't detect partition: boot *******(this is the only error that i see)********
Available partitions:←[0m
DA_handler - misc
DA_handler - countrycode
DA_handler - para
DA_handler - expdb
DA_handler - gsort
DA_handler - ffu
DA_handler - cust
DA_handler - blk1
DA_handler - rescue
DA_handler - frp
DA_handler - nvcfg
DA_handler - nvdata
DA_handler - vbmeta_a
DA_handler - vbmeta_system_a
DA_handler - vbmeta_vendor_a
DA_handler - vbmeta_b
DA_handler - vbmeta_system_b
DA_handler - vbmeta_vendor_b
DA_handler - md_udc
DA_handler - metadata
DA_handler - persist
DA_handler - protect1
DA_handler - protect2
DA_handler - seccfg
DA_handler - otp
DA_handler - md1img_a
DA_handler - spmfw_a
DA_handler - audio_dsp_a
DA_handler - scp_a
DA_handler - sspm_a
DA_handler - cam_vpu1_a
DA_handler - cam_vpu2_a
DA_handler - cam_vpu3_a
DA_handler - gz_a
DA_handler - lk_a
DA_handler - boot_a
DA_handler - vendor_boot_a
DA_handler - dtbo_a
DA_handler - tee_a
DA_handler - sec1
DA_handler - proinfo
DA_handler - efuse
DA_handler - nvram
DA_handler - boot_para
DA_handler - logo
DA_handler - md1img_b
DA_handler - spmfw_b
DA_handler - audio_dsp_b
DA_handler - scp_b
DA_handler - sspm_b
DA_handler - cam_vpu1_b
DA_handler - cam_vpu2_b
DA_handler - cam_vpu3_b
DA_handler - gz_b
DA_handler - lk_b
DA_handler - boot_b
DA_handler - vendor_boot_b
DA_handler - dtbo_b
DA_handler - tee_b
DA_handler - super *******( Is Big 8.5 GB)*****
DA_handler - userdata ******( Is big 7.7 Gb)*****
DA_handler - flashinfo

My question is. What part of the rom is really important to backup?
All except userdata.
suarezfco
suarezfco
suarezfco
Newbie
4
14-12-2021, 07:25 PM
#5



[/quote] All except userdata.
[/quote]
Thanks for your reply. I appreciate you sharing your knowledge with the community.
This post was last modified: 14-12-2021, 07:27 PM by suarezfco.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram