[Please help] Read Error Sp Flash Tool Redmi Note 10s
[Please help] Read Error Sp Flash Tool Redmi Note 10s
(13-12-2021, 02:28 AM)suarezfco Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps.
I would be very grateful if you could help me.
....
(13-12-2021, 08:23 AM)hovatek(13-12-2021, 02:28 AM)suarezfco Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps.
I would be very grateful if you could help me.
....
Already replied @ https://www.hovatek.com/forum/thread-411...#pid222751
While SP flash tool is open, hold Ctrl + Alt + V . You should see more options. check under the readback tab and change from DRAM to SRAM
(14-12-2021, 03:37 AM)suarezfcoAll except userdata.(13-12-2021, 08:23 AM)hovatek(13-12-2021, 02:28 AM)suarezfco Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps.
I would be very grateful if you could help me.
....
Already replied @ https://www.hovatek.com/forum/thread-411...#pid222751
While SP flash tool is open, hold Ctrl + Alt + V . You should see more options. check under the readback tab and change from DRAM to SRAM
Thaks for your reply sir.
this method worked for me https://www.hovatek.com/forum/thread-411...#pid222751.
here the log:
Port - Device detected
Preloader - CPU: MT6785(Helio G90)
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10212000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x813
Preloader - Target config: 0xe7
Preloader - SBC enabled: True
Preloader - SLA enabled: True
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca00
Preloader - SW Ver: 0x0
Preloader - ME_ID:
Preloader - SOC_ID: F49408153D2B19836C9C111D764855E75629183E54E44475DB3E7F4D57A9CE99
PLTools - Loading payload from mt6785_payload.bin, 0x264 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: C:\Users\suare\Downloads\Xiaomi\MTK Cliente\mtkclient-main\mtkclient\payloads\mt6785_payload.bin
Port - Device detected
DA_handler - Device is protected.
DA_handler - Device is in BROM mode. Trying to dump preloader.
-8Successfully extracted preloader for this device to: C:\Users\suare\Downloads\Xiaomi\MTK Cliente\mtkclient-main\mtkclient\Loader\Preloader\preloader_k85v1_64.bin
DAXFlash - Uploading xflash stage 1 from MTK_AllInOne_DA_5.2136.bin
DAXFlash - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXFlash - Successfully received DA sync
DAXFlash - UFS FWVer: 0x2020
DAXFlash - UFS Blocksize:0x1000
DAXFlash - UFS ID: MT128GASAO4U21
DAXFlash - UFS CID: 2c014d54313238474153414f34553231
DAXFlash - UFS LU0 Size: 0x1dcb000000
DAXFlash - UFS LU1 Size: 0x400000
DAXFlash - UFS LU2 Size: 0x400000
DAXFlash - DRAM config needed for : 2c014d54313238474153414f34553231
DAXFlash - Sending emi data ...
DAXFlash - Sending emi data succeeded.
DAXFlash - Uploading stage 2...
DAXFlash - Successfully uploaded stage 2
DAXFlash - UFS FWVer: 0x2020
DAXFlash - UFS Blocksize:0x1000
DAXFlash - UFS ID: MT128GASAO4U21
DAXFlash - UFS CID: 2c014d54313238474153414f34553231
DAXFlash - UFS LU0 Size: 0x1dcb000000
DAXFlash - UFS LU1 Size: 0x400000
DAXFlash - UFS LU2 Size: 0x400000
DAXFlash - DA-CODE : 0x131B0
DAXFlash - DA Extensions successfully added
DA_handler - Requesting available partitions ....
DA_handler
DA_handler - [LIB]: ←[31mError: Couldn't detect partition: boot *******(this is the only error that i see)********
Available partitions:←[0m
DA_handler - misc
DA_handler - countrycode
DA_handler - para
DA_handler - expdb
DA_handler - gsort
DA_handler - ffu
DA_handler - cust
DA_handler - blk1
DA_handler - rescue
DA_handler - frp
DA_handler - nvcfg
DA_handler - nvdata
DA_handler - vbmeta_a
DA_handler - vbmeta_system_a
DA_handler - vbmeta_vendor_a
DA_handler - vbmeta_b
DA_handler - vbmeta_system_b
DA_handler - vbmeta_vendor_b
DA_handler - md_udc
DA_handler - metadata
DA_handler - persist
DA_handler - protect1
DA_handler - protect2
DA_handler - seccfg
DA_handler - otp
DA_handler - md1img_a
DA_handler - spmfw_a
DA_handler - audio_dsp_a
DA_handler - scp_a
DA_handler - sspm_a
DA_handler - cam_vpu1_a
DA_handler - cam_vpu2_a
DA_handler - cam_vpu3_a
DA_handler - gz_a
DA_handler - lk_a
DA_handler - boot_a
DA_handler - vendor_boot_a
DA_handler - dtbo_a
DA_handler - tee_a
DA_handler - sec1
DA_handler - proinfo
DA_handler - efuse
DA_handler - nvram
DA_handler - boot_para
DA_handler - logo
DA_handler - md1img_b
DA_handler - spmfw_b
DA_handler - audio_dsp_b
DA_handler - scp_b
DA_handler - sspm_b
DA_handler - cam_vpu1_b
DA_handler - cam_vpu2_b
DA_handler - cam_vpu3_b
DA_handler - gz_b
DA_handler - lk_b
DA_handler - boot_b
DA_handler - vendor_boot_b
DA_handler - dtbo_b
DA_handler - tee_b
DA_handler - super *******( Is Big 8.5 GB)*****
DA_handler - userdata ******( Is big 7.7 Gb)*****
DA_handler - flashinfo
My question is. What part of the rom is really important to backup?