Lenovo K12 2083-4 Android 11 Qualcomm Snapdragon 662

Join us on

Hovatek Forum MOBILE Android Lenovo K12 2083-4 Android 11 Qualcomm Snapdragon 662

Lenovo K12 2083-4 Android 11 Qualcomm Snapdragon 662

Lenovo K12 2083-4 Android 11 Qualcomm Snapdragon 662

View a Printable Version

Cartair
Enthusiastic Member

9

11-11-2021, 10:28 PM

#1

Dear Sir Good day

i have a device Lenovo K12 2083-4 Android 11 Installed i am looking for its emmc prog firehose file . mbn . and i don't know how to find it i am googling it from 1 week but to no avail.
I downloaded stock firmware's like XT2083-4_GUAMP_RETAPAC_MY_11_RPXS31.Q2-58-16-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
and android 10 as well unzip it and i cannot find programmer file in the firmware
i downloaded stock firmware's from websites https://kfhost.net/firmware/motorola/mod...on/RETAPAC
i tried to attach boot.img recovery.img bootloader.img can't be uploaded due to file size limit
after following few guides from hovatek i can easliy connect phone in Edl mode
please tell me which programmer file .mbn will work for it for using in QPST tool or patching boot.img in hex editor for Magisk.zip latest
Best Regards

This post was last modified: 11-11-2021, 10:44 PM by Cartair. Edit Reason: attachment files are larger then uploading limit

Attached Files

vbmeta.img
Size: 4 KB / Downloads: 1

hovatek
Administrator

49,748

13-11-2021, 05:50 PM

#2

(11-11-2021, 10:28 PM)Cartair Dear Sir Good day

i have a device Lenovo K12 2083-4 Android 11 Installed i am looking for its emmc prog firehose file . mbn . and i don't know how to find it i am googling it from 1 week but to no avail.
I downloaded stock firmware's like XT2083-4_GUAMP_RETAPAC_MY_11_RPXS31.Q2-58-16-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
and android 10 as well unzip it and i cannot find programmer file in the firmware
i downloaded stock firmware's from websites
i tried to attach boot.img recovery.img bootloader.img can't be uploaded due to file size limit
after following few guides from hovatek i can easliy connect phone in Edl mode
please tell me which programmer file .mbn will work for it for using in QPST tool or patching boot.img in hex editor for Magisk.zip latest
Best Regards

It'll have to be a programmer file from the factory firmware. Generic programmer files are unlikely to work.
Attach a screenshot of the contents of the firmware

This post was last modified: 13-11-2021, 05:52 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

Cartair
Enthusiastic Member

9

13-11-2021, 06:31 PM

#3

Dear Sir

I did not find any programmer file in the extracted firmware. Kindly look in attachment file Screen shot of extracted firmware contents,
i also attached the Flashfile.xml contents and service.xml file contents in .jpg form .

Thanks

Attached Files

Contents of Extracted firmware.JPG
Size: 206.62 KB / Downloads: 3

contentes of the Flashfile.xml file.JPG
Size: 454.96 KB / Downloads: 0

contents of the Servicefile.xml file .JPG
Size: 428.87 KB / Downloads: 0

hovatek
Administrator

49,748

16-11-2021, 09:33 AM

#4

(13-11-2021, 06:31 PM)Cartair Dear Sir

I did not find any programmer file in the extracted firmware. Kindly look in attachment file Screen shot of extracted firmware contents,
i also attached the Flashfile.xml contents and service.xml file contents in .jpg form .

Thanks

I see it doesn't contain one. Maybe it's a dump or a fastboot firmware
What exactly are you trying to achieve

This post was last modified: 16-11-2021, 09:35 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Users browsing this thread:
1 Guest(s)

Join us