Not detecting to flash phone after formatting with SP Flash tool

[MFDGaming]

I had checked on the automatic format option in sp flash tool and now it doesn’t let me flash the device. It acts as if I never connected the device

[hovatek]

I had checked on the automatic format option in sp flash tool and now it doesn’t let me flash the device. It acts as if I never connected the device

Take out and re-insert the battery then retry

[MFDGaming]

I am using the no battery method. Also before I do the format it was fully detectable cause I has flashed it a couple of times.

[MFDGaming]

I had checked on the automatic format option in sp flash tool and now it doesn’t let me flash the device. It acts as if I never connected the device

Take out and re-insert the battery then retry

So, what other thing could I do/check?

[Abdulakeem14]

I had checked on the automatic format option in sp flash tool and now it doesn’t let me flash the device. It acts as if I never connected the device

Take out and re-insert the battery then retry

So, what other thing could I do/check?

find an engineer to disassemble your phone and take out the battery

[MFDGaming]

I had checked on the automatic format option in sp flash tool and now it doesn’t let me flash the device. It acts as if I never connected the device

Take out and re-insert the battery then retry

So, what other thing could I do/check?

find an engineer to disassemble your phone and take out the battery

First of all I can disassemble the mobile, second the battery is removable without unscrewing the phone, third I use the without battery flash method so there is no battery inserted. I've tried both methods, with and without battery but the flash never started

[Abdulakeem14]

I had checked on the automatic format option in sp flash tool and now it doesn’t let me flash the device. It acts as if I never connected the device

Take out and re-insert the battery then retry

So, what other thing could I do/check?

find an engineer to disassemble your phone and take out the battery

First of all I can disassemble the mobile, second the battery is removable without unscrewing the phone, third I use the without battery flash method so there is no battery inserted. I've tried both methods, with and without battery but the flash never started

try a different USB cable or PC
Uninstall all MTK drivers using USB deview @ https://www.hovatek.com/forum/thread-7660.html
then reinstall MTK drivers

[MFDGaming]

Take out and re-insert the battery then retry

So, what other thing could I do/check?

find an engineer to disassemble your phone and take out the battery

First of all I can disassemble the mobile, second the battery is removable without unscrewing the phone, third I use the without battery flash method so there is no battery inserted. I've tried both methods, with and without battery but the flash never started

try a different USB cable or PC
Uninstall all MTK drivers using USB deview @ https://www.hovatek.com/forum/thread-7660.html
then reinstall MTK drivers

I've tried 2 different computers and I've tried reinstalling the drivers, I've tried 3 different cables too but it wasn't detected

[hovatek]

I've tried 2 different computers and I've tried reinstalling the drivers, I've tried 3 different cables too but it wasn't detected

Ensure to install Mediatek USB Port drivers (Not only vcom)
Also, insert the battery and leave connected to PC then watch device manager. Check if it refreshes

[kelvinchinedu]

Are u sure u install android vc9m driver correctly?