[Please help] Hisense F23 Format All & write impossible
[Please help] Hisense F23 Format All & write impossible
(19-10-2021, 06:56 PM)Satanyka Hello everybody,try flashing again with mtk bypass @
My English is very, very poor and I am sorry. I will try to explain my problem with screenshots to be precise, step by step.
So I bought a smartphone with the owner's invoice but the cell phone was locked with the FRP.
I wanted to flash to remove the FRP.
The VolcanoBox Inferno team file (MEMCARD with upgrade mode) "F23E_20_L1360.6.06.00.ZA00_FRP_Remove_VolcanoBox_Team" correctly flashed the smarphone but the protection was still present.
I followed "https://www.hovatek.com/forum/thread-37957.html" to flash the Stock ROM "MT6737M_EMMC_Hisense F23_7_0_alps-mp-n0_mp1-V1_0_2_hs6737m_65_n_P9(2018_07_26_11_53)" I made a mistake, i chose "Format All + Downloaded"...
The smartphone was formatted but there was a problem writing the eMMC "S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (6045)"
The flash alone of "Preloader" is successful
I haven't a backup ...
My smartphone is a Hisense F23 / HS6737MT / CPU MT6737
https://www.devicespecifications.com/fr/model/1ac442f3
Thanks for your help
(19-10-2021, 06:56 PM)Satanyka ...
(21-10-2021, 06:19 PM)Satanyka(20-10-2021, 02:18 PM)X3non(19-10-2021, 06:56 PM)Satanyka ......
Hello,
thank you for your reply
the firmware file "android_scatter" says MT6753 but my cpu is an MT6737.
Is it because of this that I cannot write on my smartphone?
thank you
Quote:...
(23-10-2021, 10:29 AM)X3non(22-10-2021, 08:16 PM)Satanyka ...
skip preloader and try flashing the other files, also don't run any other commands before the write command
(23-10-2021, 08:58 PM)Satanyka Hello,
I have an error during the flash of "python mtk w boot boot.bin" as in the screenshot.
I noticed that in my device manager, the smartphone constantly disconnects and connects. Like on the video.
https://youtu.be/JsFOXkBz-Ts
Thank you
python setup.py install
pip3 install -r requirements.txt
(26-10-2021, 05:30 AM)hovatek(23-10-2021, 08:58 PM)Satanyka Hello,
I have an error during the flash of "python mtk w boot boot.bin" as in the screenshot.
I noticed that in my device manager, the smartphone constantly disconnects and connects. Like on the video.
https://youtu.be/JsFOXkBz-Ts
Thank you
1. Try adding the --preloader flag
2. Is the boot image named boot.bin or its boot.img?
3. Did you run these commands in command prompt at the mtk client folder
Code:python setup.py install
pip3 install -r requirements.txt