[Please help] Hisense F23 Format All & write impossible
[Please help] Hisense F23 Format All & write impossible
(04-11-2021, 09:17 PM)Satanyka Hello,
Sorry for the delay, I had internet problems for a few days and switched to Linux because I had driver issues for MTK with Windows 11.
The problem was solved quickly with Linux.
To answer your questions:
1- I tried the command "python3 mtk w boot boot.bin --preloader=preloader_f23e_10.bin" but it was with Windows 11.
2- Yes, I tried with the .bin and .img extension
3- Yes, I made the orders in the MTKClient folder
My driver problem is solved. I can flash but an error appears. MTKClient does not detect a partition "boot", "recovery", ... when I flash with "python3 mtk w boot boot.bin --preloader=preloader_f23e_10.bin" or "python3 mtk w boot boot.bin" or "python3 mtk recovery recovery.bin "...
see attached files
Were the partitions deleted when I used "format all" with SP Tool Flash?
Thank you so much for helps
(09-11-2021, 09:46 PM)Satanyka ..
SPFT tells me it's not the right processor but the "build.prop" tells me it's for the MT6737M
I'm lost
Thank you
(11-11-2021, 11:43 AM)hovatek(09-11-2021, 09:46 PM)Satanyka ..
SPFT tells me it's not the right processor but the "build.prop" tells me it's for the MT6737M
I'm lost
Thank you
First off, your last screenshot wasn't clear.
You are either to use mtk bypass + sp flash tool or mtk client only for flashing, not mtk client + sp flash tool
(11-11-2021, 06:23 PM)Satanyka Hello,
I have tried with MTK Bypass and SPFT and I have this error.
Thank you
(13-11-2021, 11:10 AM)hovatek(11-11-2021, 06:23 PM)Satanyka Hello,
I have tried with MTK Bypass and SPFT and I have this error.
Thank you
This is better. It says the firmware you're trying to flash is unsigned. Looks like a dump / backup from the name.
Try unticking preloader and flashing the rest
(13-11-2021, 01:27 PM)Satanyka ....
thank you
(16-11-2021, 07:38 PM)Satanyka Hello,
I have the same error ...
Thank you
(19-11-2021, 04:12 PM)hovatek(16-11-2021, 07:38 PM)Satanyka Hello,
I have the same error ...
Thank you
It looks like this is only accepting signed firmware.
Try using mtk client