boot loop tecno spark5
boot loop tecno spark5
(18-09-2021, 09:02 PM)Roadblock7904 my tecno spark 5 is in boot loop after trying to root tried to fix but cant remember the firmware version tried a lot of methods but in swd i get status sec img type mismatch i generated checksum but still doesn't work plss help its been a week
(20-09-2021, 11:16 AM)X3non(18-09-2021, 09:02 PM)Roadblock7904 my tecno spark 5 is in boot loop after trying to root tried to fix but cant remember the firmware version tried a lot of methods but in swd i get status sec img type mismatch i generated checksum but still doesn't work plss help its been a week
backup recovery.img from your device then use method 7 @ https://www.hovatek.com/forum/thread-16005.html
for spft errors, see https://www.hovatek.com/forum/thread-439.html
(20-09-2021, 07:11 PM)Roadblock7904 I tried the first method to check build number with miracle box i get "unstable comport" cus tecno phones are stupid and the second I insert the USB cable the boot loop starts right now its I doesn't have battery so it will not do fast boot and the others don't work except the inside the phone trick I will try that later. Also spft errors I checked and its the same thing its cus I don't have the right firmware but I have downloaded and tried every single tecno spark 5 kd7h firmwares
(21-09-2021, 11:03 AM)X3non(20-09-2021, 07:11 PM)Roadblock7904 I tried the first method to check build number with miracle box i get "unstable comport" cus tecno phones are stupid and the second I insert the USB cable the boot loop starts right now its I doesn't have battery so it will not do fast boot and the others don't work except the inside the phone trick I will try that later. Also spft errors I checked and its the same thing its cus I don't have the right firmware but I have downloaded and tried every single tecno spark 5 kd7h firmwares
i recommend using method 7 but you'd need to backup recovery.img from your device, power off your device then make a readback of recovery.img
scatter file for kd7h @ https://www.hovatek.com/forum/thread-34535.html (you need this to get the values for recovery partition)
mtk bypass @ https://www.hovatek.com/forum/thread-37957.html
readback guide @ https://www.hovatek.com/forum/thread-526.html (skip steps 1-4)
(21-09-2021, 11:29 AM)Roadblock7904(21-09-2021, 11:03 AM)X3non [quote="Roadblock7904" pid='219135' dateline='1632161494']
I tried the first method to check build number with miracle box i get "unstable comport" cus tecno phones are stupid and the second I insert the USB cable the boot loop starts right now its I doesn't have battery so it will not do fast boot and the others don't work except the inside the phone trick I will try that later. Also spft errors I checked and its the same thing its cus I don't have the right firmware but I have downloaded and tried every single tecno spark 5 kd7h firmwares
i recommend using method 7 but you'd need to backup recovery.img from your device, power off your device then make a readback of recovery.img
scatter file for kd7h @ https://www.hovatek.com/forum/thread-34535.html (you need this to get the values for recovery partition)
mtk bypass @ https://www.hovatek.com/forum/thread-37957.html
readback guide @ https://www.hovatek.com/forum/thread-526.html (skip steps 1-4)
(21-09-2021, 11:55 AM)Roadblock7904 method 7 will not work because I already formated and replaced it with another firmware and this fast boot happened because I flashed the wrong boot.img with adb that I downloaded from your website
(21-09-2021, 11:55 AM)Roadblock7904 i also get this error when trying to run main.py of how to flash an mtk secure boot device without da: https://ibb.co/cQZ3rt3