Hovatek Forum MOBILE Android Wiko Slide2 dead after flashing + download
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Wiko Slide2 dead after flashing + download

Wiko Slide2 dead after flashing + download

bensk230
bensk230
bensk230
Newbie
4
25-07-2021, 07:09 AM
#1



Hello,
I flashed my Wiko Slide2 phone after it was hanging while booting. I did the flashing + download (SP Flash tool) using Wiko_Slide_2_S5260_MT6592_5.1 firmware which completed successfully but the phone can't go on at all I have tried to do download but still can't start even after a complete error free process.
Kindly help.
X3non
X3non
X3non
Recognized Contributor
22,062
26-07-2021, 10:33 AM
#2
(25-07-2021, 07:09 AM)bensk230 Hello,
I flashed my Wiko Slide2 phone after it was hanging while booting. I did the flashing + download (SP Flash tool) using Wiko_Slide_2_S5260_MT6592_5.1 firmware which completed successfully but the phone can't go on at all I have tried to do download but still can't start even after a complete error free process.
Kindly help.

disconnect/reconnect the battery of the device then check if it is able to power on
if it's still dead then you must look for and try a different firmware build; you could try the firmware listed @ https://www.hovatek.com/forum/thread-12316.html
bensk230
bensk230
bensk230
Newbie
4
26-07-2021, 08:18 PM
#3
Thanks for the information. I have tried the firmware provided but still can't boot after successful flashing process.The screen is black but the charging LED light is on.
bensk230
bensk230
bensk230
Newbie
4
26-07-2021, 08:19 PM
#4
(26-07-2021, 10:33 AM)X3non
(25-07-2021, 07:09 AM)bensk230 Hello,
I flashed my Wiko Slide2 phone after it was hanging while booting. I did the flashing + download (SP Flash tool) using Wiko_Slide_2_S5260_MT6592_5.1 firmware which completed successfully but the phone can't go on at all I have tried to do download but still can't start even after a complete error free process.
Kindly help.

disconnect/reconnect the battery of the device then check if it is able to power on
if it's still dead then you must look for and try a different firmware build; you could try the firmware listed @ https://www.hovatek.com/forum/thread-12316.html

Thanks for the information. I have tried the firmware provided but still can't boot after successful flashing process.The screen is black but the charging LED light is o
Abdulakeem14
Abdulakeem14
Abdulakeem14
Senior Member
1,757
27-07-2021, 10:57 AM
#5



(26-07-2021, 08:19 PM)bensk230
(26-07-2021, 10:33 AM)X3non
(25-07-2021, 07:09 AM)bensk230 Hello,
I flashed my Wiko Slide2 phone after it was hanging while booting. I did the flashing + download (SP Flash tool) using Wiko_Slide_2_S5260_MT6592_5.1 firmware which completed successfully but the phone can't go on at all I have tried to do download but still can't start even after a complete error free process.
Kindly help.

disconnect/reconnect the battery of the device then check if it is able to power on
if it's still dead then you must look for and try a different firmware build; you could try the firmware listed @ https://www.hovatek.com/forum/thread-12316.html

Thanks for the information. I have tried the firmware provided but still can't boot after successful flashing process.The screen is black but the charging LED light is o
Try another firmware
X3non
X3non
X3non
Recognized Contributor
22,062
27-07-2021, 01:11 PM
#6
(26-07-2021, 08:18 PM)bensk230 Thanks for the information. I have tried the firmware provided but still can't boot after successful flashing process.The screen is black but the charging LED light is on.

did you take out / reinsert the battery and the device still remains dead? if yes, then look for a different firmware build
bensk230
bensk230
bensk230
Newbie
4
30-07-2021, 03:24 PM
#7
(27-07-2021, 01:11 PM)X3non
(26-07-2021, 08:18 PM)bensk230 Thanks for the information. I have tried the firmware provided but still can't boot after successful flashing process. The screen is black but the charging LED light is on.

did you take out / reinsert the battery and the device still remains dead? if yes, then look for a different firmware build

Hello I have tried different firmware but still nothing shows after a successful flashing process.
Could there be something blocking the booting process?
X3non
X3non
X3non
Recognized Contributor
22,062
31-07-2021, 11:45 AM
#8
(30-07-2021, 03:24 PM)bensk230 Hello I have tried different firmware but still nothing shows after a successful flashing process.
Could there be something blocking the booting process?

how many different firmware builds have you tried? can you list the build numbers?
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram