[Mauricekouve]

Hello dear friends. I'm not a good writer but let me try to expose my problems...
I'm a novice in flashing smart phones, last Friday I was having some network bugs so after following some tutorials on hovatek.com , I have decided to flash my infinix hot 7 x624b with its stock ROM which I have downloaded. I have successfully installed the VCOM drivers and the SP FLASH TOOL.
During the flashing process, in the yellowish load; the NEPA took the light and everything went off and the process was interrupted.I had to start all over again. The device would not turn on. No more sign of life, even if I plug in the charger. Except that if I connect to the computer, the VCOM DRIVERS recognize it but nothing worked in the SP FLASH TOOL. When I load the SCATTER FILE and pressed DOWNLOAD BUTTON, nothing loads..... In tried multiple times in vain. I kept charging again and again but still no boot up.
Please can someone help me out there?

#the computer makes a sound when the device is connected.
#the vcom drivers show a sign of a connected MTK device.
#but the flash tool could not do anything to the device as it will not see it.
&I tried pressing all the hard keys ( volumes and power) In vain.
&I tried restarting in vain.
&I tried charging in vain.

Please help me ?

[X3non]

Hello dear friends. I'm not a good writer but let me try to expose my problems...
...
Please help me ?

if you can then disassemble the back and disconnect / reconnect the battery then you can proceed with flashing
if you can't then i'm afraid you'll have to keep charging ; you can get some other useful tips @ https://www.hovatek.com/forum/thread-808.html

[Mauricekouve]

Thank you for your reply sir. I have disassembled the battery and tried reconnecting a new battery but the device would not boot up. I think that I must do as you recommended by firstly disconnecting the battery and proceeding the flashing.... I'll be back soon? thanks

[X3non]

Thank you for your reply sir. I have disassembled the battery and tried reconnecting a new battery but the device would not boot up. I think that I must do as you recommended by firstly disconnecting the battery and proceeding the flashing.... I'll be back soon? thanks

you should reconnect the battery before attempting to flash again
and also ensure that you're using the right DA file for your model listed @ https://www.hovatek.com/forum/thread-23339.html

[Mauricekouve]

Hello my brothers. I'm grateful to bring here my testimonies, my satisfactions and my gratitudes. Last Month I've got my INFINIX_HOT_7_X624B bricked. In effect, I was trying to flash it while the process was interrupted and my device go dead. I strongly believed in how HOVATEK Geniuses could give me a helping hand and today my Phone came back to life. At first they told me to keep charging it and it will certainly boot up. I tried and tried to charge it for 7 days but to no avail. Finally they advised me to disassemble the battery and flash it with Tecno Flash Tool (TFT). after that my phone came back to life.

I would like to assure everyone present in this group to have faith and confidence on the tips taught in this forum. I'm so happy for you????