dead infinix after flash x680b
dead infinix after flash x680b
(06-05-2021, 09:25 PM)coliotte Flash files count is :26Use format+download in sp flash tool
Action : Firmware update.
Selected Model: Infinix: X680B
Exe version: Avengers Box MTK 0.7.6
Scenario: [0]Safe Flash
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(49) : MediaTek USB Port (COM49)
[49] \\?\usb#vid_0e8d&pid_0003#5&51ff58f&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 1.
Helio MT6765 phone detected, swithing to helio api
Loading emmi from download
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6765
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010044503644 : 000000000000000000
EMMC UA SIZE: 0xe8f800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe91000000 [58.266 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(54) : MediaTek DA USB VCOM (Android) (COM54)
[54] \\?\usb#vid_0e8d&pid_2001#5&51ff58f&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting flash helio.
SGPT
PGPT
[0] WRITE TO PARTITION [ preloader ]
[14] WRITE TO PARTITION [ tkv ]
[15] WRITE TO PARTITION [ recovery ]
[18] WRITE TO PARTITION [ md1img ]
[19] WRITE TO PARTITION [ spmfw ]
[20] WRITE TO PARTITION [ scp1 ]
[21] WRITE TO PARTITION [ scp2 ]
[22] WRITE TO PARTITION [ sspm_1 ]
[23] WRITE TO PARTITION [ sspm_2 ]
[27] WRITE TO PARTITION [ lk ]
[28] WRITE TO PARTITION [ lk2 ]
[29] WRITE TO PARTITION [ boot ]
[30] WRITE TO PARTITION [ logo ]
[31] WRITE TO PARTITION [ dtbo ]
[32] WRITE TO PARTITION [ tee1 ]
[33] WRITE TO PARTITION [ tee2 ]
[34] WRITE TO PARTITION [ vbmeta ]
[35] WRITE TO PARTITION [ vbmeta_system ]
Error[0xc002002a]: STATUS_SEC_IMG_TYPE_MISMATCH
ps:bootloader is locked.
this firmware is a backup from the same phone I made it before it died
still have the problem with "vbmeta_system.bin" vbmeta_vendor.bin"
also system won't flash I get :
"[37] WRITE TO PARTITION [ super ]
Error[0xc0020005]: STATUS_SEC_IMG_TOO_LARGE "
flashed firmware is : Infinix Hot 9 Play X680B (X680B-H6215EFIJ-Q-OP-200730V166) [Factory / Signed]
the phone is X680B 4gb/64gb the phone is stuck in red-state now
(08-05-2021, 06:37 AM)coliotte i just noticed you wanted the screenshot as attachment
here you go
I also managed to find a higher version of the firmware for this phone v238 but the problem is the same
I'm happy to share it btw
the screenshots show one with the firmware V166 from here and the other screenshot from the v238 version
(08-05-2021, 08:46 PM)coliotte same problem vbmeta_system / vendor will not pass
super will give a large image error as usual
I think without vbmeta_system.img super will not pass
I flashed version: X680B-H6215EFIJ-Q-OP-210408V247 today and same problem