Infinix X604 firmware backup
Infinix X604 firmware backup
(05-05-2021, 04:07 AM)MeeDoo74 i tried to backup my mobile's firmware using wwr_mtk tool and sp flash tool method @ https://www.hovatek.com/forum/thread-21970.html but I stopped at step number 17 and i cant make the memory test then i moved to the alternative method @ https://www.hovatek.com/forum/thread-22701.html and i stopped again at step 1 again because when i follow this guide @ https://www.hovatek.com/forum/thread-526.html and when start mtk droid tools my phone not detected and i check my drivers and its properly installed and now i cant take a backup from my firmware
Can any one help me ?
(05-05-2021, 12:21 PM)X3non(05-05-2021, 04:07 AM)MeeDoo74 i tried to backup my mobile's firmware using wwr_mtk tool and sp flash tool method @ https://www.hovatek.com/forum/thread-21970.html but I stopped at step number 17 and i cant make the memory test then i moved to the alternative method @ https://www.hovatek.com/forum/thread-22701.html and i stopped again at step 1 again because when i follow this guide @ https://www.hovatek.com/forum/thread-526.html and when start mtk droid tools my phone not detected and i check my drivers and its properly installed and now i cant take a backup from my firmware
Can any one help me ?
there's nothing in the guide that has to do with mtk droid tool
see https://www.hovatek.com/forum/thread-22701.html ; in step 1, you're to use the empty scatter file you made from the parent guide
(07-05-2021, 10:28 AM)X3non(06-05-2021, 06:14 PM)MeeDoo74 after do the step number 20 i dont get the window that appeared in step number 21 and this what i get
rom2 you selected, what does it contain?
(07-05-2021, 06:08 PM)MeeDoo74 it contains a full readback of EMMC_USER using the value I got from the RAM test but i named the file as ROM_2 because i have file named ROM_1 that i get from readback of Region EMMC_USER with start address and partition size to get the the full length address as step 1 here @ https://www.hovatek.com/forum/thread-22701.html
(08-05-2021, 03:36 AM)X3non(07-05-2021, 06:08 PM)MeeDoo74 it contains a full readback of EMMC_USER using the value I got from the RAM test but i named the file as ROM_2 because i have file named ROM_1 that i get from readback of Region EMMC_USER with start address and partition size to get the the full length address as step 1 here @ https://www.hovatek.com/forum/thread-22701.html
delete or rename that rom_1, you can rename to pgpt
rename rom_2 to rom_1 then place in the same folder location as rom_0
use wwr v2.51, select rom_0 , it'll automatically select rom_1 as well ; see the video guide @ https://youtu.be/pj4iFakq33M
(08-05-2021, 08:08 AM)MeeDoo74 Well, i did everything correctly, but why can't SP Flashtool recognize the extracted files (on the right) in a correct way? and why the wwr mtk extracted every thing to 2 files (like boot_a and boot_b)
(08-05-2021, 11:28 AM)X3non(08-05-2021, 08:08 AM)MeeDoo74 Well, i did everything correctly, but why can't SP Flashtool recognize the extracted files (on the right) in a correct way? and why the wwr mtk extracted every thing to 2 files (like boot_a and boot_b)
not sure what option you selected to cut the rom, you should select the option to "cut as it is" i.e if you are unsure what to select. it should cut everything and make them selectable in sp flash tool
having boot_a and boot_b means the device uses A/B partitioning system ; refer to https://source.android.com/devices/tech/ota/ab