[hovatek]

This guide will show you how to fix NVRAM WARNING Err = 0x10 an LG Android devices using LGUP. The trick is to write a valid WiFi MAC address

Requirements

• Download and install LG drivers
  
• Download the firmware for your model (.kdz or .tot)
  
• Download LGUP tool
  
• Download the dll that'll work for your model (might come as .msi or .dll). Ensure the dll is renamed to LGUP_Common.dll and saved to C:\Program Files (x86)\LG Electronics\LGUP\model\Common
  
• The device can enter Download Mode (Power off > Hold volume increase button > Connect to PC via USB cable > Keep holding the Vol+ button till it enters Download Mode)
  
• The WiFi MAC address you wish to write (Under Hardware Info)
  

Steps to use LGUP to fix NVRAM Warning Err = 0x10 on  LG

Follow the steps below to fix NVRAM Warning Err = 0x10 on LG Android phones

See the video below or @ https://youtu.be/VsMOUfO02UM

1. Get the device into Download Mode and launch LGUP. The device should get detected
   
   
   
   
   
   
2. Tick PDM under Process
   
   
   
   
   
   
3. Load the kdz / tot for your model (click the space under File Path > click the browse icon that appears > select the kdz or tot) and click Start
   
   
   
   
   
   
4. You should see USB Connection established
   
   
   
   
   
   
5. The device should reboot into a blue screen
   
   
   
   
   
   
6. The Info Write box should appear
   
   
   
   
   
   
7. Input the WiFi MAC address you wish to write and click Write Data
   
   
   
   
   
   
8. You should see Waiting device for 15 sec
   
   
   
   
   
   
9. You should see STANDBY and LGUP should begin flashing the firmware
   
   
   
   
   
   
10. PDM Information should appear, wait till its done
    
    
    
    
    
    
11. Save PDM.txt when prompted
    
    
    
    
    
    
12. You can now close PDM Information and LGUP. The phone should've boot to Setup Wizard
    
    
    
    
    

Important Notice

• If you get You have to set at least one input file then ensure to load the kdz or tot in LGUP
  
• The 0x10 error doesn't affect your WiFi or Tethering, some just find it annoying
  

Video Transcript

In this video tutorial, I'll be explaining how to fix NVRAM WARNING Err = 0x10 on an LG Android device using LGUP. This usually happens after you have an issue with your NVRAM. Now, you need to have the kdz for your device model, you need to have the WIFI address for your model. You can find that under Hardware Info of the phone or the device and you need to have setup LGUP drivers and all, dll and everything like that. I'll link to all of that. Now, you boot the device into Download Mode of course and you connect it to the PC so that LGUP can launch. Now, ensure to load the kdz or tot for you model, I've loaded mine already then you click on PDM. Now you click on Start. Now the device is going to reboot into a Blue screen, you just wait for that. Now you have the Info Write menu so you just input the WiFi address you intend to write. You click Write Data. Now this is going to both write the firmware and write the WiFi address. Its going to fix the WiFi 0x10 on your device, just wait for it to be complete. When prompted, you can save the PDM.txt. So that's how to write WiFi address and fix WiFI 0x10 error on your LG Android device using LGUP