Login

Prince Benedict · 28-03-2021, 02:41 PM

Please guys I really need your help.there's this infinix x608 my client brought to me, the problem is the phone is stuck In endless bootloop, sometimes it boot completely to the home page stays for 30sec-1min and then reboot itself .I have flash it using(miracle box, HQXA &QFIL)several times with firmware version v18&24 still that didn't resolve it...I don't know what to do anymore because the flashing completed successfully yet it still didn't work. I have even tick wipe selected partitions and erase the phone with miracle box, then reflash but same problem...

**X3non** · 29-03-2021, 11:03 AM

(28-03-2021, 02:41 PM)Prince Benedict Wrote: Please guys I really need your help.there's this infinix x608 my client brought to me, the problem is the phone is stuck In endless bootloop, sometimes it boot completely to the home page stays for 30sec-1min and then reboot itself .I have flash it using(miracle box, HQXA &QFIL)several times with firmware version v18&24 still that didn't resolve it...I don't know what to do anymore because the flashing completed successfully yet it still didn't work. I have even tick wipe selected partitions and erase the phone with miracle box, then reflash but same problem...

did you by any chance check the build number of the phone before flashing?
post full build number of the two firmwares you've tried so far and try flashing X608-QL1661ABCDEF-O-180406V11 @ https://www.hovatek.com/forum/thread-24298.html

Prince Benedict · 29-03-2021, 09:35 PM

Unfortunately I didn't check the previous build before flashing...i flashed this one (X608-QL1661D-O-IN-180816V18) [Factory / Signed] from hovatek and
X608-QL1661ABCDEF-O-181031V24 from romprovider.com both flashed successfully but it still bootloop

**X3non** · 30-03-2021, 09:29 AM

(29-03-2021, 09:35 PM)Prince Benedict Wrote: Unfortunately I didn't check the previous build before flashing...i flashed this one (X608-QL1661D-O-IN-180816V18) [Factory / Signed] from hovatek and
X608-QL1661ABCDEF-O-181031V24 from romprovider.com both flashed successfully but it still bootloop

you'll need to test the emmc to be sure that what you flashed is actually been written to the device
use miracle thunder to read_info and get the current build number from the device OR backup recovery partition and use method 7 @ https://www.hovatek.com/forum/thread-16005.html
flash a different firmware build then retrieve the build number from the phone again, confirm if you are getting the new build or the old build

Prince Benedict · 30-03-2021, 05:08 PM

Yeah I have confirmed if the firmware were actually written on the device, as at the time I flashed this build (X608-QL1661ABCDEF-O-181031V24), I boot to recovery and checked the current build and the build number tallies with the build above which means it was written same with (X608-QL1661D-O-IN-180816V18) .....I haven't encountered this kind of problem before which surprises me

**X3non** · 31-03-2021, 09:56 AM

(30-03-2021, 05:08 PM)Prince Benedict Wrote: Yeah I have confirmed if the firmware were actually written on the device, as at the time I flashed this build (X608-QL1661ABCDEF-O-181031V24), I boot to recovery and checked the current build and the build number tallies with the build above which means it was written same with (X608-QL1661D-O-IN-180816V18) .....I haven't encountered this kind of problem before which surprises me

look for and try a different firmware build

Login
Username:
Password:	Lost Password?
	Remember me
OR