Hovatek Forum MOBILE Android preloader file for dp7cpro-kc07t-a1-l-20160119
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


preloader file for dp7cpro-kc07t-a1-l-20160119

preloader file for dp7cpro-kc07t-a1-l-20160119

Pages (2): 1 2 Next
dreded
dreded
dreded
Enthusiastic Member
6
09-03-2021, 02:32 PM
#1



I am trying to revive a dead tecno 7c pro and need the preloader file as the one I have seems to be corrupted. Thank you.
build num: DP7CPRO-KC07T-A1-L-20160119
kernel: 3.10.72+
android 5.1
Abdulakeem14
Abdulakeem14
Abdulakeem14
Senior Member
1,757
10-03-2021, 08:40 AM
#2
(09-03-2021, 02:32 PM)dreded I am trying to revive a dead tecno 7c pro and need the preloader file as the one I have seems to be corrupted. Thank you.
build num: DP7CPRO-KC07T-A1-L-20160119
kernel: 3.10.72+
android 5.1
check the list @ https://www.hovatek.com/forum/thread-19534.html
dreded
dreded
dreded
Enthusiastic Member
6
10-03-2021, 08:51 PM
#3
Thanks for the info. Tried them all but they don't seem to work for this build.
Abdulakeem14
Abdulakeem14
Abdulakeem14
Senior Member
1,757
11-03-2021, 08:31 AM
#4
(10-03-2021, 08:51 PM)dreded Thanks for the info. Tried them all but they don't seem to work for this build.
Try the Tecno 7C Pro (DP7CPRO-KC07T-A1-L-20160513) build again then disconnect and re-connect your battery and try powering on the device
X3non
X3non
X3non
Recognized Contributor
22,062
11-03-2021, 10:36 AM
#5



(09-03-2021, 02:32 PM)dreded I am trying to revive a dead tecno 7c pro and need the preloader file as the one I have seems to be corrupted. Thank you.
build num: DP7CPRO-KC07T-A1-L-20160119
kernel: 3.10.72+
android 5.1

how did the phone go dead in the first place?
dreded
dreded
dreded
Enthusiastic Member
6
11-03-2021, 04:48 PM
#6
(11-03-2021, 08:31 AM)Abdulakeem14
(10-03-2021, 08:51 PM)dreded Thanks for the info. Tried them all but they don't seem to work for this build.
Try the Tecno 7C Pro (DP7CPRO-KC07T-A1-L-20160513) build again then disconnect and re-connect your battery and try powering on the device

Ok. But the battery for the phone is not removeable.
dreded
dreded
dreded
Enthusiastic Member
6
11-03-2021, 04:52 PM
#7
(11-03-2021, 10:36 AM)X3non
(09-03-2021, 02:32 PM)dreded I am trying to revive a dead tecno 7c pro and need the preloader file as the one I have seems to be corrupted. Thank you.
build num: DP7CPRO-KC07T-A1-L-20160119
kernel: 3.10.72+
android 5.1

how did the phone go dead in the first place?

Belonged to my brother. After it crashed and was replaced, I asked him for it with the hope I can revive it.
Abdulakeem14
Abdulakeem14
Abdulakeem14
Senior Member
1,757
11-03-2021, 04:52 PM
#8
(11-03-2021, 04:48 PM)dreded
(11-03-2021, 08:31 AM)Abdulakeem14
(10-03-2021, 08:51 PM)dreded Thanks for the info. Tried them all but they don't seem to work for this build.
Try the Tecno 7C Pro (DP7CPRO-KC07T-A1-L-20160513) build again then disconnect and re-connect your battery and try powering on the device

Ok. But the battery for the phone is not removeable.
you going to have look for an engineer who can.
X3non
X3non
X3non
Recognized Contributor
22,062
12-03-2021, 10:52 AM
#9
(11-03-2021, 04:52 PM)dreded Belonged to my brother. After it crashed and was replaced, I asked him for it with the hope I can revive it.

DP7CPRO-KC07T-A1-L-20160513 ; was this the build number of the device when the device was still fully functional? or the build number you got from the phone after it had gone dead?


(11-03-2021, 04:48 PM)dreded Ok. But the battery for the phone is not removeable.

you need to disassemble the back then disconnect / reconnect the battery clip
dreded
dreded
dreded
Enthusiastic Member
6
13-03-2021, 08:49 AM
#10



(12-03-2021, 10:52 AM)X3non
(11-03-2021, 04:52 PM)dreded Belonged to my brother. After it crashed and was replaced, I asked him for it with the hope I can revive it.

DP7CPRO-KC07T-A1-L-20160513 ; was this the build number of the device when the device was still fully functional? or the build number you got from the phone after it had gone dead?


(11-03-2021, 04:48 PM)dreded Ok. But the battery for the phone is not removeable.

you need to disassemble the back then disconnect / reconnect the battery clip

DP7CPRO-KC07T-A1-L-20160119
This is the build number after the phone was dead. He told me the phone bricked after a failed attempt at upgrading.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram