Hovatek Forum MOBILE Android TECHNO pop 2 power b1p
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


TECHNO pop 2 power b1p

TECHNO pop 2 power b1p

10-02-2021, 08:31 PM
#1



Hello, I failed to flash the tecno POP 2 Power B1p device via swd. The firmware does not go further, here is the swd log:
Code:

[PID:2628] [TID:8692] [2021-02-10 21:26:13::0491]  DLOperationStart(): Do format and download...
[PID:2628] [TID:8692] [2021-02-10 21:26:13::0491]  FormatAndDownload(): bTodoDisconnectDA = 1, if bTodoDisconnectDA is 1, it will do Disconnect when fail
[PID:2628] [TID:8692] [2021-02-10 21:26:13::0491]  FormatAndDownload(): Connect with DA...
[PID:2628] [TID:8692] [2021-02-10 21:26:13::0491]  DAConnect(): DA reset key is 0x68,DA_end_stage is 2
[PID:2628] [TID:8692] [2021-02-10 21:26:13::0491] : m_p_dl_handle(047C9808).(MTKDLL.cpp, 2129).
[PID:2628] [TID:8692] [2021-02-10 21:26:43::0490]  DAConnect(): [ERROR] DA connect fail,ErrorMsg:S_BROM_CMD_STARTCMD_TIMEOUT
[PID:2628] [TID:8692] [2021-02-10 21:26:43::0490]  FormatAndDownload(): [ERROR] DA connect fail, ret is 2006!
[PID:2628] [TID:8692] [2021-02-10 21:26:43::0494]  DLOperationStart(): [ERROR]Do download failed...

via flash tool error 2005
HELP ME
This post was last modified: 11-02-2021, 10:43 AM by X3non.
X3non
X3non
X3non
Recognized Contributor
22,062
11-02-2021, 10:45 AM
#2
(10-02-2021, 08:31 PM)Andrii Pasichnik Hello, I failed to flash the tecno POP 2 Power B1p device via swd. The firmware does not go further, here is the swd log:
...
via flash tool error 2005
HELP ME

what exactly is wrong with the phone? and how did the problem begin?
which version of swd tool are you using? and did you try using spft with the right DA? download @ https://www.hovatek.com/forum/thread-23243.html
11-02-2021, 12:12 PM
#3
(11-02-2021, 10:45 AM)X3non
(10-02-2021, 08:31 PM)Andrii Pasichnik Hello, I failed to flash the tecno POP 2 Power B1p device via swd. The firmware does not go further, here is the swd log:
...
via flash tool error 2005
HELP ME

what exactly is wrong with the phone? and how did the problem begin?
which version of swd tool are you using? and did you try using spft with the right DA? download @ https://www.hovatek.com/forum/thread-23243.html
the phone had a lock password, wanted to reset with firmware. After flashing the drain from its branch, the phone stopped working altogether, it shows no signs of life. Yes, changed da and auth. All versions of swd have tried different, or rather everything that is on the forum .. you forgive me, but I'm from Ukraine and can write badly in English
This post was last modified: 11-02-2021, 12:12 PM by Andrii Pasichnik.
X3non
X3non
X3non
Recognized Contributor
22,062
12-02-2021, 09:24 AM
#4
(11-02-2021, 12:12 PM)Andrii Pasichnik the phone had a lock password, wanted to reset with firmware. After flashing the drain from its branch, the phone stopped working altogether, it shows no signs of life. Yes, changed da and auth. All versions of swd have tried different, or rather everything that is on the forum .. you forgive me, but I'm from Ukraine and can write badly in English

did you take note of the build number of your device before flashing firmware?
try disassembling the back then disconnect / reconnect the battery clip, lets know if you can now power on the device or not
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram