Hovatek Forum MOBILE Android Infinix SMART 5 X657 Red State and Verified boot enabled
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Infinix SMART 5 X657 Red State and Verified boot enabled

Infinix SMART 5 X657 Red State and Verified boot enabled

Pages (5): 1 2 3 4 5 Next
hassansuriya1115
hassansuriya1115
hassansuriya1115
Junior Member
25
26-01-2021, 01:00 PM
#1



I was rooting my Infinix SMART 5 X657B with the help of Magisk. After unlocking bootloader and flashing with the patched_boot.img I got Red State error.
I tried flashing with SP Flash tool with the Stock Firmware but it says Verified boot is enabled. Please download signed images.
Attached Files
.jpeg
WhatsApp Image 2021-01-26 at 4.59.04 PM.jpeg
Size: 53.55 KB / Downloads: 34
X3non
X3non
X3non
Recognized Contributor
22,062
26-01-2021, 03:32 PM
#2
(26-01-2021, 01:00 PM)hassansuriya1115 I was rooting my Infinix SMART 5 X657B with the help of Magisk. After unlocking bootloader and flashing with the patched_boot.img I got Red State error.
I tried flashing with SP Flash tool with the Stock Firmware but it says Verified boot is enabled. Please download signed images.

you didn't flash vbmeta hence the red state, you'd only need to flash boot not necessarily the full firmware to fix this
is it a backup or factory firmware you have? attach a full screenshot of the contents of the firmware
and do you have the custom DA for this model? you can try either DA for X625B or X626B @ https://www.hovatek.com/forum/thread-23339.html
hassansuriya1115
hassansuriya1115
hassansuriya1115
Junior Member
25
28-01-2021, 04:13 AM
#3
(26-01-2021, 03:32 PM)X3non
(26-01-2021, 01:00 PM)hassansuriya1115 I was rooting my Infinix SMART 5 X657B with the help of Magisk. After unlocking bootloader and flashing with the patched_boot.img I got Red State error.
I tried flashing with SP Flash tool with the Stock Firmware but it says Verified boot is enabled. Please download signed images.

you didn't flash vbmeta hence the red state, you'd only need to flash boot not necessarily the full firmware to fix this
is it a backup or factory firmware you have? attach a full screenshot of the contents of the firmware
and do you have the custom DA for this model? you can try either DA for X625B or X626B @ https://www.hovatek.com/forum/thread-23339.html

I don't have backup. I downloaded the firmware files from here https://firmwarefile.com/infinix-smart-5-x657b. I attached the screenshot of firmware files which I am using. The DA File which I used is here https://we.tl/t-nszkE5oL33 (Please confirm it that should I use it or should use your suggested one?)

I tried flashing only boot file with your suggested DA file but it didn't work.
This post was last modified: 28-01-2021, 04:20 AM by hassansuriya1115.
Attached Files
.png
Screenshot 2021-01-28 074416.png
Size: 76.6 KB / Downloads: 27
X3non
X3non
X3non
Recognized Contributor
22,062
28-01-2021, 12:01 PM
#4
(28-01-2021, 04:13 AM)hassansuriya1115 I tried flashing only boot file with your suggested DA file but it didn't work.

what's the error message from both DA files? attach screenshots if possible
hassansuriya1115
hassansuriya1115
hassansuriya1115
Junior Member
25
29-01-2021, 11:01 AM
#5



(28-01-2021, 12:01 PM)X3non
(28-01-2021, 04:13 AM)hassansuriya1115 I tried flashing only boot file with your suggested DA file but it didn't work.

what's the error message from both DA files? attach screenshots if possible

First it was asking for authentication file but today I tried again and both DA File worked. I flashed boot file with both DA Files but the Red State is not fixed. It's the same. Nothing happened!
X3non
X3non
X3non
Recognized Contributor
22,062
30-01-2021, 10:13 AM
#6
(29-01-2021, 11:01 AM)hassansuriya1115 First it was asking for authentication file but today I tried again and both DA File worked. I flashed boot file with both DA Files but the Red State is not fixed. It's the same. Nothing happened!

did you flash boot.img for the exact same build number of your device?
the build number of the firmware from where you got the boot.img you flashed must match the build number of your phone, if it doesn't then you might want to consider flashing the full firmware (ensure to take note of the build number of your device, see https://www.hovatek.com/forum/thread-16005.html )

one more thing, can you specify the exact DA file that worked for you?
This post was last modified: 30-01-2021, 10:13 AM by X3non.
hassansuriya1115
hassansuriya1115
hassansuriya1115
Junior Member
25
30-01-2021, 10:56 AM
#7
(30-01-2021, 10:13 AM)X3non
(29-01-2021, 11:01 AM)hassansuriya1115 First it was asking for authentication file but today I tried again and both DA File worked. I flashed boot file with both DA Files but the Red State is not fixed. It's the same. Nothing happened!

did you flash boot.img for the exact same build number of your device?
the build number of the firmware from where you got the boot.img you flashed must match the build number of your phone, if it doesn't then you might want to consider flashing the full firmware (ensure to take note of the build number of your device, see https://www.hovatek.com/forum/thread-16005.html )

one more thing, can you specify the exact DA file that worked for you?

I didn't notice my phone's build number but it's X625B.
The two DA Files which you mentioned above worked for me.
1: X625B
2: X626B

Earlier, I was using this Infinix_Smart_5_X657B_MT6761_V57_200409_(by_firmwarefile.com) then I used Hovatek boot.img Infinix Smart 5 X657B (X657B-H6117DEF-QGo-OP-200409V57) [Factory / Signed] (https://www.hovatek.com/forum/thread-34537.html)

Where Can I find build number? Miracle box is not detecting my mobile and other options mentioned here https://www.hovatek.com/forum/thread-16005.html are not possible to do in this condition.
This post was last modified: 30-01-2021, 11:01 AM by hassansuriya1115.
hassansuriya1115
hassansuriya1115
hassansuriya1115
Junior Member
25
30-01-2021, 02:04 PM
#8
(30-01-2021, 10:13 AM)X3non
(29-01-2021, 11:01 AM)hassansuriya1115 First it was asking for authentication file but today I tried again and both DA File worked. I flashed boot file with both DA Files but the Red State is not fixed. It's the same. Nothing happened!

did you flash boot.img for the exact same build number of your device?
the build number of the firmware from where you got the boot.img you flashed must match the build number of your phone, if it doesn't then you might want to consider flashing the full firmware (ensure to take note of the build number of your device, see https://www.hovatek.com/forum/thread-16005.html )

one more thing, can you specify the exact DA file that worked for you?

My phone is now fully dead. It's not connecting to PC. I was using the fourth method to find build number. The I made a scatter file and followed the steps in the video. I stuck at RAM Test because new version of SP Flash Tool doesn't offer RAM test. I cancelled the DRAM Test and after that my mobile is dead.
Now is there any solution?
This post was last modified: 30-01-2021, 02:04 PM by hassansuriya1115.
kelvinchinedu
kelvinchinedu
kelvinchinedu
Contributor
1,302
30-01-2021, 09:08 PM
#9
Connect ur device to usb to pc and remove it and try holding power bottom for long time on many occasions
X3non
X3non
X3non
Recognized Contributor
22,062
31-01-2021, 11:29 AM
#10



(30-01-2021, 10:56 AM)hassansuriya1115 ...The two DA Files which you mentioned above worked for me.
1: X625B
2: X626B

this is a strange phenomenon


(30-01-2021, 10:56 AM)hassansuriya1115 Earlier, I was using this Infinix_Smart_5_X657B_MT6761_V57_200409_(by_firmwarefile.com) then I used Hovatek boot.img Infinix Smart 5 X657B (X657B-H6117DEF-QGo-OP-200409V57) [Factory / Signed] (https://www.hovatek.com/forum/thread-34537.html)
[quote="hassansuriya1115" pid='208335' dateline='1612000569']

both of these are the same, notice V57 on both filenames


[quote="hassansuriya1115" pid='208352' dateline='1612011863']
My phone is now fully dead. It's not connecting to PC.

stuck in preloader mode, you only need to find the right key combo to reboot OR if you can disassemble to disconnect / reconnect the battery
you can try @kelvinchinedu's suggestion OR try this
launch device manager on your PC, connect the phone, the device should be detected as vcom preloader
here's where you test for different combo
try holding vol down + power button for at least 30 seconds, if this is the right combo, the device should reconnect to mtk usb port, keep holding the buttons and don't release until it powers on, it could take a full minute or more with the device switching back to preloader then finally reboot
if vol down + power doesn't work after about 30 seconds, try vol up + vol down + power button


(30-01-2021, 02:04 PM)hassansuriya1115 I was using the fourth method to find build number. The I made a scatter file and followed the steps in the video. I stuck at RAM Test because new version of SP Flash Tool doesn't offer RAM test. I cancelled the DRAM Test and after that my mobile is dead.
Now is there any solution?

the chipset of your device doesn't support ram test and in the guide if you kept reading on, you'll notice the alternative method if you don't have ramtest option
another point to note is that you should use method 7, it's much simpler. since you are already going through the backup procedure, backup recovery instead of system. and this will only be useful if all you flashed from the firmware is boot.img
Pages (5): 1 2 3 4 5 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram