Login

Oni Precious · 16-10-2020, 06:43 PM

Am trying to flash a bricked ulefone Armor 5 which entered a boot loop..using sp flash tool but it keeps bring this error:STATUS_UNSUPPORT_OP(0xC0040001) when I choosed format all+download....and bring this error:STATUS_INVALID_PARAMETERS(0xC0030007)....when I choosed download only on the sp flash tool..
Pls can anybody help...with the meaning and solution to this errors??

**X3non** · 19-10-2020, 09:32 AM

(16-10-2020, 06:43 PM)Oni Precious Wrote: Am trying to flash a bricked ulefone Armor 5 which entered a boot loop..using sp flash tool but it keeps bring this error:STATUS_UNSUPPORT_OP(0xC0040001) when I choosed format all+download....and bring this error:STATUS_INVALID_PARAMETERS(0xC0030007)....when I choosed download only on the sp flash tool..
Pls can anybody help...with the meaning and solution to this errors??

avoid using format all + download
attach a full screenshot of the error message
lastly, try using other versions of sp flash tool e.g v5.1724 or 5.1828

Oni Precious · 19-10-2020, 10:16 PM

Have tried using those versions of sp flash tool but still the same...

Oni Precious · 19-10-2020, 10:29 PM

[attachment=8324 Wrote:
Screenshot_20201019-222022.png Size: 334.21 KB Downloads: 11
Oni Precious pid='203335' dateline='1603142175']Have tried using those versions of sp flash tool but still the same...I tried dowload only, upgrade, format all+dowload...but none seems to be working... someone should pls help with this ooh??

**X3non** · 20-10-2020, 11:07 AM

(19-10-2020, 10:16 PM)Oni Precious Wrote: Have tried using those versions of sp flash tool but still the same...

the device is still stuck on bootloop right? if yes
retry flashing again but untick only preloader then try flashing the remaining files

Oni Precious · 20-10-2020, 08:00 PM

I tried flashing a partition at a time. or flashing without the preloader partion and it brings this error....Error OxCo030008: ERROR:
STATUS INVALID_GPT
(OxCo030008)

Oni Precious · 20-10-2020, 08:03 PM

And the phone Is totally dead ,it does not comes on at all....but its always detected by the flash tool anytime I connect it to the computer....

**X3non** · 21-10-2020, 11:56 AM

(20-10-2020, 08:00 PM)Oni Precious Wrote: I tried flashing a partition at a time. or flashing without the preloader partion and it brings this error....Error OxCo030008: ERROR:
STATUS INVALID_GPT
(OxCo030008)

see https://www.hovatek.com/forum/thread-439.html

Oni Precious · 24-10-2020, 10:42 AM

Ohk...thanks
:
Pls How can i write firmware directly to emmc using an emmc tool such as UFI box....

And what does this error actually means...
error:STATUS_UNSUPPORT_OP(0xC0040001) ??..I tried checking for the meaning..but did not found any answer to it??

**X3non** · 26-10-2020, 08:42 AM

(24-10-2020, 10:42 AM)Oni Precious Wrote: Ohk...thanks
:
Pls How can i write firmware directly to emmc using an emmc tool such as UFI box....

you'll need ufi hardware box for that

(24-10-2020, 10:42 AM)Oni Precious Wrote: And what does this error actually means...
error:STATUS_UNSUPPORT_OP(0xC0040001) ??..I tried checking for the meaning..but did not found any answer to it??

as of this moment, only mediatek can tell, seeing as they developed the tool

Login
Username:
Password:	Lost Password?
	Remember me
OR