Login

Burhan Khanzada · 13-10-2020, 04:48 AM

last night i put phone into charge i guess on 15% charging but when i woke its getting bootloop and searched for it and tried to wipe data/factory reset but its not working and showing these logs see image at this link https://ibb.co/0KNrjth
also, i tried fastboot method but its saying command failed because of the locked state it thing its related to bootloader and oem unlock see other images
mobile logs in fastboot https://ibb.co/qD7qQpK
cmd commands https://ibb.co/rHjTLbm

i also tried flashing stock firmware using sp flash tool but its also failed with this erro ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)

Burhan Khanzada · 13-10-2020, 04:54 AM

last night i put phone into charge i guess on 15% charging but when i woke its getting bootloop and searched for it and tried to wipe data/factory reset but its not working and showing these logs see image at this link https://ibb.co/0KNrjth
also, i tried fastboot method but its saying command failed because of the locked state it thing its related to bootloader and oem unlock see other images
mobile logs in fastboot https://ibb.co/qD7qQpK
cmd commands https://ibb.co/rHjTLbm

i also tried flashing stock firmware using sp flash tool but its also failed with this erro ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)

Chijohn · 13-10-2020, 08:44 AM

(13-10-2020, 04:54 AM)Burhan Khanzada Wrote: last night i put phone into charge i guess on 15% charging but when i woke its getting bootloop and searched for it and tried to wipe data/factory reset but its not working and showing these logs see image at this link https://ibb.co/0KNrjth
also, i tried fastboot method but its saying command failed because of the locked state it thing its related to bootloader and oem unlock see other images
mobile logs in fastboot https://ibb.co/qD7qQpK
cmd commands https://ibb.co/rHjTLbm

i also tried flashing stock firmware using sp flash tool but its also failed with this erro ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)

Did you use the right Da file of the phone. Download it here https://www.hovatek.com/forum/thread-23339.html besides, I am not sure if sp flash tools will flash the phone. You need latest cm2mtk2 atleast from v2.14-2.16 because its supported ultra flash. otherwise you can take it to calcare.

**X3non** · 13-10-2020, 10:53 AM

(13-10-2020, 04:48 AM)Burhan Khanzada Wrote: last night i put phone into charge i guess on 15% charging but when i woke its getting bootloop and searched for it and tried to wipe data/factory reset but its not working and showing these logs see image at this link https://ibb.co/0KNrjth
also, i tried fastboot method but its saying command failed because of the locked state it thing its related to bootloader and oem unlock see other images
mobile logs in fastboot https://ibb.co/qD7qQpK
cmd commands https://ibb.co/rHjTLbm

i also tried flashing stock firmware using sp flash tool but its also failed with this erro ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)

you can try "fastboot -w" ; see if it's able to reset the device
for flashing the firmware, you need to use the DA file for your model ; download @ https://www.hovatek.com/forum/thread-23339.html

Burhan Khanzada · 14-10-2020, 06:49 PM

(13-10-2020, 10:53 AM)X3non Wrote: you can try "fastboot -w" ; see if it's able to reset the device
for flashing the firmware, you need to use the DA file for your model ; download @ https://www.hovatek.com/forum/thread-23339.html

well unfortunately i have tried format all + download mode in sp flash tool and now its totally bricked not even opening any suggestion or its over now need to change board or have to flash from repair shop using any box

**X3non** · 15-10-2020, 11:52 AM

(14-10-2020, 06:49 PM)Burhan Khanzada Wrote: well unfortunately i have tried format all + download mode in sp flash tool and now its totally bricked not even opening ...

was the flashing attempt successful or not?
have you tried disconnecting / reconnecting the battery of the device?

Burhan Khanzada · 16-10-2020, 10:56 AM

(15-10-2020, 11:52 AM)X3non Wrote: was the flashing attempt successful or not?
have you tried disconnecting / reconnecting the battery of the device?

hm i think its not some error showed up i now i don't remember exactly but yes it not attempt not goes successfully that why now just its detected on the device manager and if i now trying to flash it with sp flash tool with a dedicated da file but now its showing thi error ERROR: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012) and hint for selection a valid auth file which i don't have and searched for it but cant find one

**X3non** · 19-10-2020, 09:13 AM

(16-10-2020, 10:56 AM)Burhan Khanzada Wrote: hm i think its not some error showed up i now i don't remember exactly but yes it not attempt not goes successfully that why now just its detected on the device manager and if i now trying to flash it with sp flash tool with a dedicated da file but now its showing thi error ERROR: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012) and hint for selection a valid auth file which i don't have and searched for it but cant find one

flash factory firmware using SWD tool (format all + download) @ https://www.hovatek.com/forum/thread-23709.html

Burhan Khanzada · 22-10-2020, 05:39 PM

(19-10-2020, 09:13 AM)X3non Wrote: flash factory firmware using SWD tool (format all + download) @ https://www.hovatek.com/forum/thread-23709.html

SWD says to use format all + download option need dongle which i don't have

Burhan Khanzada · 22-10-2020, 06:42 PM

(22-10-2020, 05:39 PM)Burhan Khanzada Wrote:
(19-10-2020, 09:13 AM)X3non Wrote: flash factory firmware using SWD tool (format all + download) @ https://www.hovatek.com/forum/thread-23709.html

SWD says to use format all + download option need dongle which i don't have

i tried v4.1811.23.11 with format all and download option but noit after 3 mins its showing this error status_ext_ram_exception

Login
Username:
Password:	Lost Password?
	Remember me
OR