Hovatek Forum MOBILE Android Infinix S4 X626B bootloop
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Infinix S4 X626B bootloop

Infinix S4 X626B bootloop

Pages (2): 1 2 Next
Burhan Khanzada
Burhan Khanzada
Burhan Khanzada
Enthusiastic Member
9
13-10-2020, 04:48 AM
#1



last night i put phone into charge i guess on 15% charging but when i woke its getting bootloop and searched for it and tried to wipe data/factory reset but its not working and showing these logs see image at this link https://ibb.co/0KNrjth
also, i tried fastboot method but its saying command failed because of the locked state it thing its related to bootloader and oem unlock see other images 
mobile logs in fastboot https://ibb.co/qD7qQpK
cmd commands https://ibb.co/rHjTLbm

i also tried flashing stock firmware using sp flash tool but its also failed with this erro ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)
Burhan Khanzada
Burhan Khanzada
Burhan Khanzada
Enthusiastic Member
9
13-10-2020, 04:54 AM
#2
last night i put phone into charge i guess on 15% charging but when i woke its getting bootloop and searched for it and tried to wipe data/factory reset but its not working and showing these logs see image at this link https://ibb.co/0KNrjth
also, i tried fastboot method but its saying command failed because of the locked state it thing its related to bootloader and oem unlock see other images 
mobile logs in fastboot https://ibb.co/qD7qQpK
cmd commands https://ibb.co/rHjTLbm

i also tried flashing stock firmware using sp flash tool but its also failed with this erro ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)
Chijohn
Chijohn
Chijohn
Junior Member
36
13-10-2020, 08:44 AM
#3
(13-10-2020, 04:54 AM)Burhan Khanzada last night i put phone into charge i guess on 15% charging but when i woke its getting bootloop and searched for it and tried to wipe data/factory reset but its not working and showing these logs see image at this link https://ibb.co/0KNrjth
also, i tried fastboot method but its saying command failed because of the locked state it thing its related to bootloader and oem unlock see other images 
mobile logs in fastboot https://ibb.co/qD7qQpK
cmd commands https://ibb.co/rHjTLbm

i also tried flashing stock firmware using sp flash tool but its also failed with this erro ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)
  Did you use the right Da file of the phone. Download it here  https://www.hovatek.com/forum/thread-23339.html  besides, I am not sure if sp flash tools will flash the phone. You need latest cm2mtk2 atleast from v2.14-2.16 because its supported ultra flash. otherwise  you can take it to calcare.
X3non
X3non
X3non
Recognized Contributor
22,062
13-10-2020, 10:53 AM
#4
(13-10-2020, 04:48 AM)Burhan Khanzada last night i put phone into charge i guess on 15% charging but when i woke its getting bootloop and searched for it and tried to wipe data/factory reset but its not working and showing these logs see image at this link https://ibb.co/0KNrjth
also, i tried fastboot method but its saying command failed because of the locked state it thing its related to bootloader and oem unlock see other images 
mobile logs in fastboot https://ibb.co/qD7qQpK
cmd commands https://ibb.co/rHjTLbm

i also tried flashing stock firmware using sp flash tool but its also failed with this erro ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)

you can try "fastboot -w" ; see if it's able to reset the device
for flashing the firmware, you need to use the DA file for your model ; download @ https://www.hovatek.com/forum/thread-23339.html
Burhan Khanzada
Burhan Khanzada
Burhan Khanzada
Enthusiastic Member
9
14-10-2020, 06:49 PM
#5



(13-10-2020, 10:53 AM)X3non you can try "fastboot -w" ; see if it's able to reset the device
for flashing the firmware, you need to use the DA file for your model ; download @ https://www.hovatek.com/forum/thread-23339.html

well unfortunately i have tried format all + download mode in sp flash tool and now its totally bricked not even opening any suggestion or its over now need to change board or have to flash from repair shop using any box
This post was last modified: 14-10-2020, 06:50 PM by Burhan Khanzada.
X3non
X3non
X3non
Recognized Contributor
22,062
15-10-2020, 11:52 AM
#6
(14-10-2020, 06:49 PM)Burhan Khanzada well unfortunately i have tried format all + download mode in sp flash tool and now its totally bricked not even opening ...

was the flashing attempt successful or not?
have you tried disconnecting / reconnecting the battery of the device?
Burhan Khanzada
Burhan Khanzada
Burhan Khanzada
Enthusiastic Member
9
16-10-2020, 10:56 AM
#7
(15-10-2020, 11:52 AM)X3non was the flashing attempt successful or not?
have you tried disconnecting / reconnecting the battery of the device?

hm i think its not some error showed up i now i don't remember exactly but yes it not attempt not goes successfully that why now just its detected on the device manager and if i now trying to flash it with sp flash tool with a dedicated da file but now its showing thi error ERROR: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012)  and hint for selection a valid auth file which i don't have and searched for it but cant find one
X3non
X3non
X3non
Recognized Contributor
22,062
19-10-2020, 09:13 AM
#8
(16-10-2020, 10:56 AM)Burhan Khanzada hm i think its not some error showed up i now i don't remember exactly but yes it not attempt not goes successfully that why now just its detected on the device manager and if i now trying to flash it with sp flash tool with a dedicated da file but now its showing thi error ERROR: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012)  and hint for selection a valid auth file which i don't have and searched for it but cant find one

flash factory firmware using SWD tool (format all + download) @ https://www.hovatek.com/forum/thread-23709.html
Burhan Khanzada
Burhan Khanzada
Burhan Khanzada
Enthusiastic Member
9
22-10-2020, 05:39 PM
#9
(19-10-2020, 09:13 AM)X3non flash factory firmware using SWD tool (format all + download) @ https://www.hovatek.com/forum/thread-23709.html

SWD says to use format all + download option need dongle which i don't have
Burhan Khanzada
Burhan Khanzada
Burhan Khanzada
Enthusiastic Member
9
22-10-2020, 06:42 PM
#10



(22-10-2020, 05:39 PM)Burhan Khanzada
(19-10-2020, 09:13 AM)X3non flash factory firmware using SWD tool (format all + download) @ https://www.hovatek.com/forum/thread-23709.html

SWD says to use format all + download option need dongle which i don't have

i tried v4.1811.23.11 with format all and download option but noit after 3 mins its showing this error status_ext_ram_exception
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram