[Devu]

Hello,
This is my first post but i find this forum very interesting... Iam newbie to this but i think i can handle some things...

So a beautiful Meizu M5c has briked after flash.. I cant understand the reason tho.... I have tried almost all solutions .. BTW the PC recognise the plug in with a sound and also as MediaTek USb Port ... Another stange thing is that it unplugs by itself after few seconds!!
I forgot to mention that the device does nothing even on Power Plug in or on PC Usb cable(No sign of charging or anything similar) 

Any help would be really apriciatted!!
P.S Sorry for my bad english!!!

[hovatek]

Hello,
This is my first post but i find this forum very interesting... Iam newbie to this but i think i can handle some things...

So a beautiful Meizu M5c has briked after flash.. I cant understand the reason tho.... I have tried almost all solutions .. BTW the PC recognise the plug in with a sound and also as MediaTek USb Port ... Another stange thing is that it unplugs by itself after few seconds!!
I forgot to mention that the device does nothing even on Power Plug in or on PC Usb cable(No sign of charging or anything similar) 

Any help would be really apriciatted!!
P.S Sorry for my bad english!!!

1. Was flashing successful or you got an error then phone went dead?
2. Have you tried disconnecting and reconnecting the battery?
3. Hold both volume buttons then connect to PC, tell me what you observe

[Devu]

Hello,
This is my first post but i find this forum very interesting... Iam newbie to this but i think i can handle some things...

So a beautiful Meizu M5c has briked after flash.. I cant understand the reason tho.... I have tried almost all solutions .. BTW the PC recognise the plug in with a sound and also as MediaTek USb Port ... Another stange thing is that it unplugs by itself after few seconds!!
I forgot to mention that the device does nothing even on Power Plug in or on PC Usb cable(No sign of charging or anything similar) 

Any help would be really apriciatted!!
P.S Sorry for my bad english!!!

1. Was flashing successful or you got an error then phone went dead?
2. Have you tried disconnecting and reconnecting the battery?
3. Hold both volume buttons then connect to PC, tell me what you observe

1. Yes was successful.Al;ready disconnected battery ... 
2.i had to make phone little parts to do that tho....
3.Phone dont power up or any similar things - Sound on pc that device been connected .. Attached PS of the Device Manager 

https://prnt.sc/ui90cm

[X3non]

...

do you remember the previous build number of the device before you flashed?
retry flashing a different firmware, you could try the firmware @ https://www.hovatek.com/forum/thread-15674.html

[Devu]

...

do you remember the previous build number of the device before you flashed?
retry flashing a different firmware, you could try the firmware @ https://www.hovatek.com/forum/thread-15674.html

Unfortunatly No.. i will give a try to this one and let you know!!

[Devu]

...

do you remember the previous build number of the device before you flashed?
retry flashing a different firmware, you could try the firmware @ https://www.hovatek.com/forum/thread-15674.html

THis is the error at the moment.... Is there any luck for that???

https://prnt.sc/uj3yoc

[X3non]

THis is the error at the moment.... Is there any luck for that???

https://prnt.sc/uj3yoc

found this @ [ Login / Register to download free]
you can try the auth file from with and lets know if it works or not

[Devu]

....

found this @ [ Login / Register to download free]
you can try the auth file from with and lets know if it works or not

See beloW

[Devu]

....

found this @ [ Login / Register to download free]
you can try the auth file from with and lets know if it works or not

Error changed this time

https://prnt.sc/ujqdx1

[hovatek]

...

This means you'll need a different auth file