[Please help] Meizu M5C Brick after flash
[Please help] Meizu M5C Brick after flash
(15-09-2020, 11:20 PM)Devu Hello,
This is my first post but i find this forum very interesting... Iam newbie to this but i think i can handle some things...
So a beautiful Meizu M5c has briked after flash.. I cant understand the reason tho.... I have tried almost all solutions .. BTW the PC recognise the plug in with a sound and also as MediaTek USb Port ... Another stange thing is that it unplugs by itself after few seconds!!
I forgot to mention that the device does nothing even on Power Plug in or on PC Usb cable(No sign of charging or anything similar)
Any help would be really apriciatted!!
P.S Sorry for my bad english!!!
(16-09-2020, 12:14 PM)hovatek(15-09-2020, 11:20 PM)Devu Hello,
This is my first post but i find this forum very interesting... Iam newbie to this but i think i can handle some things...
So a beautiful Meizu M5c has briked after flash.. I cant understand the reason tho.... I have tried almost all solutions .. BTW the PC recognise the plug in with a sound and also as MediaTek USb Port ... Another stange thing is that it unplugs by itself after few seconds!!
I forgot to mention that the device does nothing even on Power Plug in or on PC Usb cable(No sign of charging or anything similar)
Any help would be really apriciatted!!
P.S Sorry for my bad english!!!
1. Was flashing successful or you got an error then phone went dead?
2. Have you tried disconnecting and reconnecting the battery?
3. Hold both volume buttons then connect to PC, tell me what you observe
(16-09-2020, 12:37 PM)Devu ...
(17-09-2020, 08:06 PM)X3nonUnfortunatly No.. i will give a try to this one and let you know!!(16-09-2020, 12:37 PM)Devu ...
do you remember the previous build number of the device before you flashed?
retry flashing a different firmware, you could try the firmware @ https://www.hovatek.com/forum/thread-15674.html
(17-09-2020, 08:06 PM)X3nonTHis is the error at the moment.... Is there any luck for that???(16-09-2020, 12:37 PM)Devu ...
do you remember the previous build number of the device before you flashed?
retry flashing a different firmware, you could try the firmware @ https://www.hovatek.com/forum/thread-15674.html
(17-09-2020, 08:32 PM)Devu THis is the error at the moment.... Is there any luck for that???
https://prnt.sc/uj3yoc
(18-09-2020, 10:35 AM)X3nonSee beloW(17-09-2020, 08:32 PM)Devu ....
found this @ https://mega.nz/file/W1oQzKqD#Ebm2y0FMoB...v7NBqblikw
you can try the auth file from with and lets know if it works or not
(18-09-2020, 08:03 PM)Devu(18-09-2020, 10:35 AM)X3nonError changed this time(17-09-2020, 08:32 PM)Devu ....
found this @ https://mega.nz/file/W1oQzKqD#Ebm2y0FMoB...v7NBqblikw
you can try the auth file from with and lets know if it works or not
https://prnt.sc/ujqdx1
(18-09-2020, 08:04 PM)Devu ...