Hovatek Forum MOBILE Android [Please help] Meizu M5C Brick after flash
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Meizu M5C Brick after flash

[Please help] Meizu M5C Brick after flash

Pages (2): 1 2 Next
Devu
Devu
Devu
Enthusiastic Member
7
15-09-2020, 11:20 PM
#1



Hello,
This is my first post but i find this forum very interesting... Iam newbie to this but i think i can handle some things...

So a beautiful Meizu M5c has briked after flash.. I cant understand the reason tho.... I have tried almost all solutions .. BTW the PC recognise the plug in with a sound and also as MediaTek USb Port ... Another stange thing is that it unplugs by itself after few seconds!!
I forgot to mention that the device does nothing even on Power Plug in or on PC Usb cable(No sign of charging or anything similar) 

Any help would be really apriciatted!! Dodgy
P.S Sorry for my bad english!!!
This post was last modified: 15-09-2020, 11:22 PM by Devu.
hovatek
hovatek
hovatek
Administrator
49,570
16-09-2020, 12:14 PM
#2
(15-09-2020, 11:20 PM)Devu Hello,
This is my first post but i find this forum very interesting... Iam newbie to this but i think i can handle some things...

So a beautiful Meizu M5c has briked after flash.. I cant understand the reason tho.... I have tried almost all solutions .. BTW the PC recognise the plug in with a sound and also as MediaTek USb Port ... Another stange thing is that it unplugs by itself after few seconds!!
I forgot to mention that the device does nothing even on Power Plug in or on PC Usb cable(No sign of charging or anything similar) 

Any help would be really apriciatted!! Dodgy
P.S Sorry for my bad english!!!

1. Was flashing successful or you got an error then phone went dead?
2. Have you tried disconnecting and reconnecting the battery?
3. Hold both volume buttons then connect to PC, tell me what you observe

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Devu
Devu
Devu
Enthusiastic Member
7
16-09-2020, 12:37 PM
#3
(16-09-2020, 12:14 PM)hovatek
(15-09-2020, 11:20 PM)Devu Hello,
This is my first post but i find this forum very interesting... Iam newbie to this but i think i can handle some things...

So a beautiful Meizu M5c has briked after flash.. I cant understand the reason tho.... I have tried almost all solutions .. BTW the PC recognise the plug in with a sound and also as MediaTek USb Port ... Another stange thing is that it unplugs by itself after few seconds!!
I forgot to mention that the device does nothing even on Power Plug in or on PC Usb cable(No sign of charging or anything similar) 

Any help would be really apriciatted!! Dodgy
P.S Sorry for my bad english!!!

1. Was flashing successful or you got an error then phone went dead?
2. Have you tried disconnecting and reconnecting the battery?
3. Hold both volume buttons then connect to PC, tell me what you observe

1. Yes was successful.Al;ready disconnected battery ... 
2.i had to make phone little parts to do that tho.... Big Grin
3.Phone dont power up or any similar things - Sound on pc that device been connected .. Attached PS of the Device Manager 

https://prnt.sc/ui90cm





X3non
X3non
X3non
Recognized Contributor
22,062
17-09-2020, 08:06 PM
#4
(16-09-2020, 12:37 PM)Devu ...

do you remember the previous build number of the device before you flashed?
retry flashing a different firmware, you could try the firmware @ https://www.hovatek.com/forum/thread-15674.html
Devu
Devu
Devu
Enthusiastic Member
7
17-09-2020, 08:24 PM
#5



(17-09-2020, 08:06 PM)X3non
(16-09-2020, 12:37 PM)Devu ...

do you remember the previous build number of the device before you flashed?
retry flashing a different firmware, you could try the firmware @ https://www.hovatek.com/forum/thread-15674.html
Unfortunatly No.. i will give a try to this one and let you know!!
Devu
Devu
Devu
Enthusiastic Member
7
17-09-2020, 08:32 PM
#6
(17-09-2020, 08:06 PM)X3non
(16-09-2020, 12:37 PM)Devu ...

do you remember the previous build number of the device before you flashed?
retry flashing a different firmware, you could try the firmware @ https://www.hovatek.com/forum/thread-15674.html
THis is the error at the moment.... Is there any luck for that??? Sad

https://prnt.sc/uj3yoc
This post was last modified: 17-09-2020, 08:32 PM by Devu.
X3non
X3non
X3non
Recognized Contributor
22,062
18-09-2020, 10:35 AM
#7
(17-09-2020, 08:32 PM)Devu THis is the error at the moment.... Is there any luck for that??? Sad

https://prnt.sc/uj3yoc

found this @ https://mega.nz/file/W1oQzKqD#Ebm2y0FMoB...v7NBqblikw
you can try the auth file from with and lets know if it works or not
Devu
Devu
Devu
Enthusiastic Member
7
18-09-2020, 08:03 PM
#8
(18-09-2020, 10:35 AM)X3non
(17-09-2020, 08:32 PM)Devu ....

found this @ https://mega.nz/file/W1oQzKqD#Ebm2y0FMoB...v7NBqblikw
you can try the auth file from with and lets know if it works or not
See beloW
This post was last modified: 18-09-2020, 10:00 PM by Devu.
Devu
Devu
Devu
Enthusiastic Member
7
18-09-2020, 08:04 PM
#9
(18-09-2020, 08:03 PM)Devu
(18-09-2020, 10:35 AM)X3non
(17-09-2020, 08:32 PM)Devu ....

found this @ https://mega.nz/file/W1oQzKqD#Ebm2y0FMoB...v7NBqblikw
you can try the auth file from with and lets know if it works or not
Error changed this time

https://prnt.sc/ujqd
x1
hovatek
hovatek
hovatek
Administrator
49,570
19-09-2020, 01:47 PM
#10



(18-09-2020, 08:04 PM)Devu ...

This means you'll need a different auth file

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram