Hovatek Forum MOBILE Android my itel Prime4-V608-7.0-OP-V016
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


my itel Prime4-V608-7.0-OP-V016

my itel Prime4-V608-7.0-OP-V016

alinaswe
alinaswe
alinaswe
Enthusiastic Member
5
10-09-2020, 02:13 PM
#1



my itel Prime4-V608-7.0-OP-V016 is stack on logo on and it is flashing when ever i connect it to power,
what happened to give a back ground it started to heat up and went off tried to turn it on after hours it went in that state
what do i do to fix it
X3non
X3non
X3non
Recognized Contributor
22,062
11-09-2020, 11:05 AM
#2
(10-09-2020, 02:13 PM)alinaswe my itel Prime4-V608-7.0-OP-V016 is stack on logo on and it is flashing when ever i connect it to power,
what happened to give a back ground it started to heat up and went off tried to turn it on after hours it went in that state
what do i do to fix it

have you tried flashing stock firmware fir this model?
and what do you mean by "and it is flashing when ever i connect it to power" ?
alinaswe
alinaswe
alinaswe
Enthusiastic Member
5
11-09-2020, 11:13 AM
#3
(11-09-2020, 11:05 AM)X3non
(10-09-2020, 02:13 PM)alinaswe my itel Prime4-V608-7.0-OP-V016 is stack on logo on and it is flashing when ever i connect it to power,
what happened to give a back ground it started to heat up and went off tried to turn it on after hours it went in that state
what do i do to fix it

have you tried flashing stock firmware fir this model?
and what do you mean by "and it is flashing when ever i connect it to power" ?



i meant it is coming on and off within few seconds.
i have not tried to flash ,for i do not know how to do it.
alinaswe
alinaswe
alinaswe
Enthusiastic Member
5
11-09-2020, 11:14 AM
#4
i meant it is coming on and off within few seconds.
i have not tried to flash ,for i do not know how to do it
thanks for you response.
xerxes
xerxes
xerxes
Senior Member
8,355
11-09-2020, 08:36 PM
#5



(11-09-2020, 11:14 AM)alinaswe i meant it is coming on and off within few seconds.
i have not tried to flash ,for i do not know how to do it
thanks for you response.


Does the phone boot to homescreen before it powers off? If yes, state the phone’s full build no. *its in settings>about>build no.
This post was last modified: 11-09-2020, 08:37 PM by xerxes.
X3non
X3non
X3non
Recognized Contributor
22,062
11-09-2020, 08:37 PM
#6
(11-09-2020, 11:14 AM)alinaswe i meant it is coming on and off within few seconds.
i have not tried to flash ,for i do not know how to do it
thanks for you response.

try flashing only boot, userdata and system.img from the Prime4-V608-7.0-OP-V017-20180601 firmware @ https://www.hovatek.com/forum/thread-23877.html
use research download tool ; instructions is on the same link
alinaswe
alinaswe
alinaswe
Enthusiastic Member
5
14-09-2020, 12:33 PM
#7
how do i open the file which i have downloaded ,the file side is 1.10 Gb
please help
thanks regards
ali
alinaswe
alinaswe
alinaswe
Enthusiastic Member
5
14-09-2020, 03:29 PM
#8
i got this [Hovatek] Itel IT1704 Prime 4 (Prime4-V608-7.0-OP-V017-20180601)
and SPD Factory Tool R2.9.9015 and later this [gsmtzeddy] Itel Prime4-V608-7.0-OP-V008-20170918 and this sci_android_usb_driver_jungo_internal
none of these have intsalled in the laptop, os win10 processor type AMD
what do i do from now on ward
xerxes
xerxes
xerxes
Senior Member
8,355
14-09-2020, 05:21 PM
#9
(14-09-2020, 12:33 PM)alinaswe how do i open the file which i have downloaded ,the file side is 1.10 Gb
please help
thanks regards
ali

extract the content of the zip with WinRAR or WinZip then follow this guide @ https://www.hovatek.com/forum/thread-1231.html to flash the firmware.
X3non
X3non
X3non
Recognized Contributor
22,062
15-09-2020, 09:51 AM
#10



(14-09-2020, 12:33 PM)alinaswe how do i open the file which i have downloaded ,the file side is 1.10 Gb
please help
thanks regards
ali

use 7zip to extract


(14-09-2020, 03:29 PM)alinaswe i got this [Hovatek] Itel IT1704 Prime 4 (Prime4-V608-7.0-OP-V017-20180601)
and SPD Factory Tool R2.9.9015 and later this [gsmtzeddy] Itel Prime4-V608-7.0-OP-V008-20170918 and this sci_android_usb_driver_jungo_internal
none of these have intsalled in the laptop, os win10 processor type AMD
what do i do from now on ward

see my previous reply @ https://www.hovatek.com/forum/thread-365...#pid201134
use research download tool and flash only the 3 partitions listed
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram