Login

aammuull96 · 09-08-2020, 12:08 PM

Screenshot (384).png Size: 183.44 KB Downloads: 18

Screenshot (383).png Size: 139.55 KB Downloads: 11

Screenshot (382).png Size: 132.11 KB Downloads: 9

Screenshot (381).png Size: 132.6 KB Downloads: 6

Screenshot (384).png Size: 183.44 KB Downloads: 18

Screenshot (384).png Size: 183.44 KB Downloads: 18

Screenshot (383).png Size: 139.55 KB Downloads: 11

Screenshot (382).png Size: 132.11 KB Downloads: 9

Screenshot (381).png Size: 132.6 KB Downloads: 6

my micromax A106 is not turning on after flashing via sp flash tools. i have tried various firmwares for my device but it is not turning on. i have tried connecting it to miracle box also but it does not detect my phone. in sp tool firmware upgrade shows failed to get pmt info. also i cannot format it using sp tool as it always shows S_DL_READ_PT_FAIL(5073). What should i do now? i had to flash it initially because the phone stuck on boot screen and i did flash selecting format all plus download , from that moment phone is not turning on. also phone disconnects and connects after every few seconds. looking into device manager i found that it switches from mtk preloader to mtk usb port and again to preloader and it continous switching into both of that. i have tried reinstalling drivers and changing usb cable

**X3non** · 10-08-2020, 09:32 AM

(09-08-2020, 12:08 PM)aammuull96 Wrote: my micromax A106 is not turning on after flashing via sp flash tools. ...

have you tried flashing using "download only" in spft?

aammuull96 · 10-08-2020, 08:17 PM

Yes . Also miracle box is showing get init inf fail in most of the options other than write. I have tried flashing firmware using both miracle box and sp flash tools.

**X3non** · 11-08-2020, 10:35 AM

(10-08-2020, 08:17 PM)aammuull96 Wrote: Yes . Also miracle box is showing get init inf fail in most of the options other than write. I have tried flashing firmware using both miracle box and sp flash tools.

what happens when you attempt to flash only preloader (i.e untick everything else asides from preloader) using "download only" in spft? attach a screenshot if possible

aammuull96 · 16-08-2020, 02:31 PM

(11-08-2020, 10:35 AM)X3non Wrote:
(10-08-2020, 08:17 PM)aammuull96 Wrote: Yes . Also miracle box is showing get init inf fail in most of the options other than write. I have tried flashing firmware using both miracle box and sp flash tools.

what happens when you attempt to flash only preloader (i.e untick everything else asides from preloader) using "download only" in spft? attach a screenshot if possible

THE PRELOADER FLASHES AND SP FLASH TOOL SAYS DOWNLOAD OK

**X3non** · 17-08-2020, 08:34 AM

(16-08-2020, 02:31 PM)aammuull96 Wrote: THE PRELOADER FLASHES AND SP FLASH TOOL SAYS DOWNLOAD OK

disconnect / reconnect the battery of the phone after successfully flashing only preloader
then attempt to power it on, does the phone make the little power on vibration or it's still totally dead?

aammuull96 · 17-08-2020, 10:59 AM

It's totally Dead, nothing happens.

xerxes · 17-08-2020, 04:27 PM

(17-08-2020, 10:59 AM)aammuull96 Wrote: It's totally Dead, nothing happens.

did you charge the phone for few hours to confirm it is not a power related issue?

aammuull96 · 17-08-2020, 04:32 PM

Yes, charged for an hour

**X3non** · 18-08-2020, 09:34 AM

(17-08-2020, 10:59 AM)aammuull96 Wrote: It's totally Dead, nothing happens.

if after flashing preloader successfully then disconnecting / reconnecting the battery and the phone still remains totally dead then it's either the firmware isn't compatible or emmc chip is dead
you can look for other firmware builds to try

Login
Username:
Password:	Lost Password?
	Remember me
OR