04-06-2020, 04:52 PM (This post was last modified: 06-06-2020, 03:30 AM by priyank_jain.)
Hello, everyone, i have bricked my Infinix s4 and need stock ROM to flash. I have checked the old thread but I don't get
"X626-H624K-P-IN-191216V354 " this version.
I tried to flash the version on this thread https://www.hovatek.com/forum/thread-27769.html but no success. The firmware provided there is for MT6765 whereas the processor used in the device is MT6762. Someone answer that the hardware is almost the same it will flash. For me, on the SP flash tool I got error 0xC0060005. Similarly, on the Software download tool, I got error EXT_RAM_EXCEPTION. I think both error are for the same reason that the ROM is not for the device according to my research and I am not able to flash my device. I also used a custom DA file for the device but getting the same error and one thing I noticed that after trying to flash using the software download tool PC is not able to recognize my mobile for around 2-3 hours (Showing USB device not recognized). Can you/ anyone help me out now, it will be very thankful if you can. I am attaching the photos the error which I got
(04-06-2020, 04:52 PM)priyank_jain Wrote: Hello, everyone, i have bricked my Infinix s4 and need stock ROM to flash. I have checked the old thread but I don't get
"X626-H624JK-P-191214V354 " this version.
...
from your screenshot, you're flashing a totally wrong build
your build : X626-H624JK-P-
firmware build : X626-H624K-P-IN-
you can try the firmware X626-H624JK-P-190417V239 @ https://www.hovatek.com/forum/thread-27769.html flashing using SWD tool
05-06-2020, 01:49 PM (This post was last modified: 05-06-2020, 03:11 PM by priyank_jain.)
(05-06-2020, 11:16 AM)X3non Wrote:
(04-06-2020, 04:52 PM)priyank_jain Wrote: Hello, everyone, i have bricked my Infinix s4 and need stock ROM to flash. I have checked the old thread but I don't get
"X626-H624JK-P-191214V354 " this version.
...
from your screenshot, you're flashing a totally wrong build
your build : X626-H624JK-P-
firmware build : X626-H624K-P-IN-
you can try the firmware X626-H624JK-P-190417V239 @ https://www.hovatek.com/forum/thread-27769.html flashing using SWD tool
Sorry, I mentioned the wrong build at the time of writing the thread, actually, my build is "X626-H624K-P-IN-191216V354" and i am not able to find this firmware anywhere. So can you please help.
05-06-2020, 03:31 PM (This post was last modified: 05-06-2020, 03:31 PM by priyank_jain.)
Sorry, I mentioned the wrong build at the time of writing the thread, actually, my build is "X626-H624K-P-IN-191216V354" and i am not able to find this firmware anywhere. So can you please help.
(05-06-2020, 03:31 PM)priyank_jain Wrote: Sorry, I mentioned the wrong build at the time of writing the thread, actually, my build is "X626-H624K-P-IN-191216V354" and i am not able to find this firmware anywhere. So can you please help.
For the USB not recognized error, try disconnect and reconnect the battery or just leave it to drain.
What exactly is wrong with this phone? Why are you trying to flash?
(05-06-2020, 03:31 PM)priyank_jain Wrote: Sorry, I mentioned the wrong build at the time of writing the thread, actually, my build is "X626-H624K-P-IN-191216V354" and i am not able to find this firmware anywhere. So can you please help.
For the USB not recognized error, try disconnect and reconnect the battery or just leave it to drain.
What exactly is wrong with this phone? Why are you trying to flash?
Yeah USB problem has been resolved, and my phone is bricked during the TWRP flash, and get dead that's why i want to flash.
if so and your device was working fine before the failed attempt to flash twrp, then disconnect / reconnect the battery of the phone and the phone should boot up just fine
if not then you might want to explain how the phone went totally dead, what exactly did you do that led to the phone going dead?
