DA : EMI : Failed to get EMI info from selected source!
DA : EMI : Failed to get EMI info from selected source!
Operation : Identify [ v2.11 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM40)
MODE : PRELOADER PORT
PORT : 40
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6583 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2012 | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC.bin
AGENT : Found MT6583
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DA : DRAM NOT SUPPORT
NAND : 000000000000000000000000
eMMC : OK
eMMC : 00000000000000001501004D41473247
DAInf: 180 : 187 : 18
DA : EXT_RAM NOT initialized!
eMMC :
eMMC : BF0B0000000000001501004D41473247
NAND :
NAND : 470800000BC0000000000000
EMI : DEV : MT6589
EMI : SRC : preloader_pmt7077_3g.bin
EMI : CNT : 0001
DA : EMI : Failed to get EMI info from selected source!
DA : Failed to configure DA!
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
(05-06-2020, 08:09 AM)Jane1 It is Prestigio pmt7077 3g model. It can not start - it hangs during starting. No Recovery mode is able
Yes, I tried to use SP Flash tools ( V5.1348.0.100 that is in firmware bundle - I also tried other versions but no good)
but SP Flash tools stops with the error
PMT changed for the ROM; it must be downloaded
When I want to format first( Tab Format in SP Flash tools)
I receive
Invalid ROM or PMT address
error
Where can be a problem?
Thanks
(05-06-2020, 08:09 AM)Jane1 It is Prestigio pmt7077 3g model. It can not start - it hangs during starting. No Recovery mode is able
Yes, I tried to use SP Flash tools ( V5.1348.0.100 that is in firmware bundle - I also tried other versions but no good)
but SP Flash tools stops with the error
PMT changed for the ROM; it must be downloaded
When I want to format first( Tab Format in SP Flash tools)
I receive
Invalid ROM or PMT address
error
Where can be a problem?
Thanks
(13-06-2020, 10:26 AM)Jane1 Thanks for your reply. I have two pcs of the same model. It is Prestigio pmt7077 3g model. One Prestigio pmt7077 3g hangs during starting - it is from a customer . The other is fully working but yet the same error. When I try to use
Identify / Connect function from Chinese Miracle II ( infinity box) I receive
.....
Any idea? Thanks