Hovatek Forum MOBILE Android Bricked Phone
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Bricked Phone

Bricked Phone

Pages (2): 1 2 Next
flamingoing
flamingoing
flamingoing
Enthusiastic Member
12
02-06-2020, 03:32 AM
#1



Can you please help me, I can't distinguish if my phone is hard bricked or soft bricked. I can go to recovery mode and fastboot mode. I can't install from SD card because it always shows, installation failed. In fastboot mode, I can't install any img file because it always cancels it. I can't flash any rom because mtp usb driver can't install properly adb drivers only shows up in factory mode. Do you have any tricks on how I can comment my phone to spend flasg tool? My phone is a cloned Samsung a7 with mtk6580 processor and Android 5.1 version. Thanks you very much.
xerxes
xerxes
xerxes
Senior Member
8,357
02-06-2020, 07:12 PM
#2
(02-06-2020, 03:32 AM)flamingoing Can you please help me, I can't distinguish if my phone is hard bricked or soft bricked. I can go to recovery mode and fastboot mode. I can't install from SD card because it always shows, installation failed. In fastboot mode, I can't install any img file because it always cancels it. I can't flash any rom because mtp usb driver can't install properly adb drivers only shows up in factory mode. Do you have any tricks on how I can comment my phone to spend flasg tool? My phone is a cloned Samsung a7 with mtk6580 processor and Android 5.1 version. Thanks you very much.


What’s the phone’s current state? Dead or stuck on boot logo?
What’s the phone’s build no.?
Can you get access to a working Samsung A7 clone?
flamingoing
flamingoing
flamingoing
Enthusiastic Member
12
03-06-2020, 01:50 AM
#3
I'm sorry, It's an A9 not an A7. I don't know if this is it's build no. But it shows,
Custom Build Verno. Z6U020HC_G6_V006En20170215_LYX_A9.
BB chip: MT6580
MS Board: gxq6580_weg_1
Android Version: 5.1
SW version: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
X3non
X3non
X3non
Recognized Contributor
22,062
03-06-2020, 02:31 PM
#4
(03-06-2020, 01:50 AM)flamingoing I'm sorry, It's an A9 not an A7. I don't know if this is it's build no. But it shows,
Custom Build Verno. Z6U020HC_G6_V006En20170215_LYX_A9.
BB chip: MT6580
MS Board: gxq6580_weg_1
Android Version: 5.1
SW version: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69

found this firmware @ https://androidfilehost.com/?fid=457095661767143393
ensure to backup firmware from your device; do so using the guide @ https://www.hovatek.com/forum/thread-13347.html
then flash boot and system.img from the firmware in the link above using the guide @ https://www.hovatek.com/forum/thread-159.html then factory reset in recovery and check if your device is able to boot to homescreen
flamingoing
flamingoing
flamingoing
Enthusiastic Member
12
04-06-2020, 03:54 PM
#5



I tried flashing but it always says error 4032 sometimes error 4008. I don't have any laptop here, any stuff that I can do?
flamingoing
flamingoing
flamingoing
Enthusiastic Member
12
04-06-2020, 03:56 PM
#6
And also I already tried the rom you gave, i think it's not compatible with the device because it says error 4032, it gonna stuck at download Da 100% and next thing is the error 4032.
xerxes
xerxes
xerxes
Senior Member
8,357
04-06-2020, 05:06 PM
#7
(04-06-2020, 03:56 PM)flamingoing And also I already tried the rom you gave, i think it's not compatible with the device because it says error 4032, it gonna stuck at download Da 100% and next thing is the error 4032.


Attach the screenshot of the error let’s take a look.
flamingoing
flamingoing
flamingoing
Enthusiastic Member
12
06-06-2020, 11:54 PM
#8
I already followed x3non but now, the phone just turns black. It won't turn on, any clues how to make it work?
flamingoing
flamingoing
flamingoing
Enthusiastic Member
12
06-06-2020, 11:56 PM
#9
Another question from a friend who is also new to programming, Can u still recover stock rom after formatting the phones flash and installing new one's?
X3non
X3non
X3non
Recognized Contributor
22,062
08-06-2020, 08:33 AM
#10



(06-06-2020, 11:54 PM)flamingoing I already followed x3non but now, the phone just turns black. It won't turn on, any clues how to make it work?

did you make a firmware backup like i asked you to?
did you flash only boot & system or you flashed the entire firmware?


(06-06-2020, 11:56 PM)flamingoing Another question from a friend who is also new to programming, Can u still recover stock rom after formatting the phones flash and installing new one's?

No, once you've flashed a new rom OR formatted using SPft or similar softwares, there's no retrieving stock rom
which is why you're meant to backup before flashing
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram