We're hiring! Apply Now

Hovatek Forum MOBILE Android Acer Iconia One 10 - error with scatter file

Acer Iconia One 10 - error with scatter file

Acer Iconia One 10 - error with scatter file

bubu42
bubu42
bubu42
Newbie
1
25-05-2020, 04:13 PM
#1



Hi,
I've a Acer Iconia Tablet One 10 - Model B3-A30 (A6003).
When resetting the tablet, it went out due to lack of battery and it is impossible to restart it.

I can't download or flash using the SP Flash Tool on the tablet.

I have downloaded several firmware and during the download, it remains at 100% and displays a DRAM Failed BROM ERROR error: S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail (due to bad firmware I suppose). I downloaded the firmware from the official Acer Support site, unfortunately the scatter file provided does not correspond to the standard interpreted by SP Flash Tool and during the import, I have an error: Error: STATUS_SCATTER_FILE_INVALID (0xC0030001).
Following the advice of the forum, I started to want to modify the scatter file but I do not really understand the data that must be presented. I used and copied a scatter file from another almost similar but non-functional firmware with the same error code 4032.
When I replace the scatter file, some functionality is activity but not all.

Would it be possible for you to help me modify the scatter file so that it complies with the expected please?

Source:
- VCOM drivers find on the site
- The attached scatter file is the default from the acer support source.
- I tried to use and modify this scatter file from the following firmware: https://firmwarex.net/iconia-one-10-b3-a...mware-rom/ : erreur 0xC0030001
- Official Acer Support firmware: https://www.acer.com/ac/en/US/content/su...t/6839?b=1
Attached Files
.txt
scatter.txt
Size: 415 bytes / Downloads: 11
hovatek
hovatek
hovatek
Administrator
49,799
26-05-2020, 10:41 AM
#2
(25-05-2020, 04:13 PM)bubu42 Hi,
I've a Acer Iconia Tablet One 10 - Model B3-A30 (A6003).
When resetting the tablet, it went out due to lack of battery and it is impossible to restart it.
...

did you try flashing this scatter file firmware from acer using an older version of spft? e.g v3.xxxx
another thing to try, try backing up firmware from your device. do so using the guide @ https://www.hovatek.com/forum/thread-13347.html ; if it's successful, you could attempt to use the scatter file from the backup to flash the files from the firmware
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt