Hovatek Forum MOBILE Android Tecno camon 12 won't turn on
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Tecno camon 12 won't turn on

Tecno camon 12 won't turn on

Pages (2): 1 2 Next
lordsharks
lordsharks
lordsharks
Enthusiastic Member
9
08-05-2020, 06:30 PM
#1



I was trying to flash a custom recovery when i got a wrong scatter file error amd the phone won't boot again. Just shows white light on the top side
lordsharks
lordsharks
lordsharks
Enthusiastic Member
9
08-05-2020, 06:34 PM
#2
Keep getting this error when i tried flashing with the right scatter BROM ERROR:S_BROM CMD STARTCMD FAIL
lordsharks
lordsharks
lordsharks
Enthusiastic Member
9
08-05-2020, 07:47 PM
#3
Tried flashing custom recovery on Tecno Camon 12, but got a wrong scatter error; changed the scatter file but i keep getting
SP Flash Tool error - BROM ERROR:S_BROM CMD STARTCMD FAIL when i tried reflashing
lordsharks
lordsharks
lordsharks
Enthusiastic Member
9
08-05-2020, 08:32 PM
#4
Now the phone only brings on the white LED notification light when plugged
xerxes
xerxes
xerxes
Senior Member
8,355
08-05-2020, 11:32 PM
#5



(08-05-2020, 06:34 PM)lordsharks Keep getting this error when i tried flashing with the right scatter BROM ERROR:S_BROM CMD STARTCMD FAIL


The phone is stuck in flash mode, try disconnecting/reconnecting the phone’s battery before power on.

Did you use the DA for camon 12 when flashing twrp?
Did you use Hovatek’s porting tool to port the twrp?
X3non
X3non
X3non
Recognized Contributor
22,062
09-05-2020, 10:43 AM
#6
(08-05-2020, 07:47 PM)lordsharks Tried flashing custom recovery on Tecno Camon 12, but got a wrong scatter error; changed the scatter file but i keep getting
SP Flash Tool error - BROM ERROR:S_BROM CMD STARTCMD FAIL when i tried reflashing

(08-05-2020, 08:32 PM)lordsharks Now the phone only brings on the white LED notification light when plugged

if you never got to successfully flash or format the phone, then see https://www.hovatek.com/forum/thread-808.html
when your phone eventually powers on, then if you wish to use SP flash tool, you must ensure to use the custom DA for the model @ https://www.hovatek.com/forum/thread-23243.html
lordsharks
lordsharks
lordsharks
Enthusiastic Member
9
09-05-2020, 11:58 PM
#7
Thanks, it turned ON after disconnecting amd reconnecting the battery.

I'm not flashing the custom recovery again, before i cause another problem
desexiet
desexiet
desexiet
Experienced Member
96
11-05-2020, 01:24 AM
#8
(09-05-2020, 11:58 PM)lordsharks Thanks, it turned ON after disconnecting amd reconnecting the battery.


Currently there is no working custom recovery for CC7 unless you do it yourself from source

I'm not flashing the custom recovery again, before i cause another problem
X3non
X3non
X3non
Recognized Contributor
22,062
11-05-2020, 10:59 AM
#9
(11-05-2020, 01:24 AM)desexiet Currently there is no working custom recovery for CC7 unless you do it yourself from source

that is not true, esp. seeing as you're just coming from the thread @ https://www.hovatek.com/forum/thread-32451.html where the OP seemingly rooted using twrp
desexiet
desexiet
desexiet
Experienced Member
96
11-05-2020, 03:15 PM
#10



(11-05-2020, 10:59 AM)X3non
(11-05-2020, 01:24 AM)desexiet Currently there is no working custom recovery for CC7 unless you do it yourself from source

that is not true, esp. seeing as you're just coming from the thread @ https://www.hovatek.com/forum/thread-32451.html where the OP seemingly rooted using twrp
I mean one ported and made available online.You have to poet it at source
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram