Tecno F1 Pro
Tecno F1 Pro
(06-05-2020, 10:34 PM)J2MS Hello guys, need you help again i have this Tecno f1 pro that got stock in boot after a simple reboot. Have tried several firmware versions but all ended up with the same error. "ERROR: S_SECRO_HASH_INCORRECT(6126), MSP ERROR CODE: 0x00" but when i unchecked the PRELOADER and SECRO box flash goes successful with phone still stuck on boot but i also noticed something that when i boot into recovery i saw a firmware version that i cannot find online "192513V10" can somebody please help me here.
(07-05-2020, 10:31 AM)X3non(06-05-2020, 10:34 PM)J2MS Hello guys, need you help again i have this Tecno f1 pro that got stock in boot after a simple reboot. Have tried several firmware versions but all ended up with the same error. "ERROR: S_SECRO_HASH_INCORRECT(6126), MSP ERROR CODE: 0x00" but when i unchecked the PRELOADER and SECRO box flash goes successful with phone still stuck on boot but i also noticed something that when i boot into recovery i saw a firmware version that i cannot find online "192513V10" can somebody please help me here.
have you tried the fix for this error listed @ https://www.hovatek.com/forum/thread-439.html ?
Yes please i used it and that was how i find out that when you un-chacked the preloader and secro flashing will go sucessful but still with the same problem...i also noticed something that the phone is not accepting flash because yesterday i auto format the phone and it was succesful but after that the phone was still booting into bootloop. i wasnt expecting the phone to even power off after formating it...
(07-05-2020, 01:07 PM)J2MS Yes please i used it and that was how i find out that when you un-chacked the preloader and secro flashing will go sucessful but still with the same problem...i also noticed something that the phone is not accepting flash because yesterday i auto format the phone and it was succesful but after that the phone was still booting into bootloop. i wasnt expecting the phone to even power off after formating it...
(08-05-2020, 11:15 AM)X3nonok understood and thank you...(07-05-2020, 01:07 PM)J2MS Yes please i used it and that was how i find out that when you un-chacked the preloader and secro flashing will go sucessful but still with the same problem...i also noticed something that the phone is not accepting flash because yesterday i auto format the phone and it was succesful but after that the phone was still booting into bootloop. i wasnt expecting the phone to even power off after formating it...
auto format; format whole flash OR format whole except bootloader?
if you did format whole flash and emmc chip on the device is good then it'll result to a totally dead phone
if you did format whole flash and emmc chip is faulty, then the device will remain as it is (no changes made)