[sadio]

sir good day my people ...... i have Mf927u firmware  but how to load it that is what am facing now, the mifi only show as Remote  NDIS based internet sharing on under network....its not showing at COM port ........ i do i make it to show in COM port so can flash it with zte terminal 

[freshtyt]

sir good day my people ...... i have Mf927u firmware  but how to load it that is what am facing now, the mifi only show as Remote  NDIS based internet sharing on under network....its not showing at COM port ........ i do i make it to show in COM port so can flash it with zte terminal 

search for commands to switch mode on your device model
regular commands for zte devices you can try

Code:

http://192.168.8.1/goform/goform_set_cmd_process?goformId=SET_DEVICE_MODE&debug_enable=1

http://192.168.0.1/goform/goform_set_cmd_process?goformId=SET_DEVICE_MODE&debug_enable=1

http://connect.manager/goform/goform_set_cmd_process?goformId=SET_DEVICE_MODE&debug_enable=1

http://192.168.0.1/goform/goform_set_cmd_emdable_demod_demp_de_demod_ev_de_de_demod_ev_de_demod_demod_demod

http://192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY

[sadio]

sir good day my people ...... i have Mf927u firmware  but how to load it that is what am facing now, the mifi only show as Remote  NDIS based internet sharing on under network....its not showing at COM port ........ i do i make it to show in COM port so can flash it with zte terminal 

search for commands to switch mode on your device model
regular commands for zte devices you can try

Code:

http://192.168.8.1/goform/goform_set_cmd_process?goformId=SET_DEVICE_MODE&debug_enable=1

http://192.168.0.1/goform/goform_set_cmd_process?goformId=SET_DEVICE_MODE&debug_enable=1

http://connect.manager/goform/goform_set_cmd_process?goformId=SET_DEVICE_MODE&debug_enable=1

http://192.168.0.1/goform/goform_set_cmd_emdable_demod_demp_de_demod_ev_de_de_demod_ev_de_demod_demod_demod

http://192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY



thank u . but the COM port still not showing .... have tried all the code u sent its only the last one that gives me ......{"result":"FACTORY:ok"}

[sadio]

sir good day my people ...... i have Mf927u firmware  but how to load it that is what am facing now, the mifi only show as Remote  NDIS based internet sharing on under network....its not showing at COM port ........ i do i make it to show in COM port so can flash it with zte terminal 

search for commands to switch mode on your device model
regular commands for zte devices you can try

Code:

http://192.168.8.1/goform/goform_set_cmd_process?goformId=SET_DEVICE_MODE&debug_enable=1

http://192.168.0.1/goform/goform_set_cmd_process?goformId=SET_DEVICE_MODE&debug_enable=1

http://connect.manager/goform/goform_set_cmd_process?goformId=SET_DEVICE_MODE&debug_enable=1

http://192.168.0.1/goform/goform_set_cmd_emdable_demod_demp_de_demod_ev_de_de_demod_ev_de_demod_demod_demod

http://192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY



thank u . but the COM port still not showing .... have tried all the code u sent its only the last one that gives me ......{"result":"FACTORY:ok"}

[freshtyt]

thank u . but the COM port still not showing .... have tried all the code u sent its only the last one that gives me ......{"result":"FACTORY:ok"}[/code]

you will have to keep searching for the right command to switch your device

[sajjadburiro]

[quote='sadio' pid='192139' dateline='1588383854']
thank u . but the COM port still not showing .... have tried all the code u sent its only the last one that gives me ......{"result":"FACTORY:ok"}[/code]

MF927u Free Unlock || Jazz Mf927u Unlock | Airtel ZTE Mf927u LTE Unlock | Jazz 4g Mf927u ||Nigeria
Follow This Solution