Backup Camon 12 CC7
Backup Camon 12 CC7
(13-12-2019, 05:09 PM)innagee(13-12-2019, 04:08 PM)mencoronaldo I discovered that the phone was stuck in download mode.
I "Readinfo" using miracle thunder 2.82 which put it out of download mode.
Does it means that the device bootloader can't be unlocked because my PC can't detect it the device via "fastboot devices"
Sent from my TECNO CC7 using Hovatek Mobile
Try the fix for fastboot not detecting @ https://www.hovatek.com/forum/thread-17105.html
(14-12-2019, 03:22 PM)mencoronaldo I succeeded in unlocking the bootloader but unable to load mt6762 scatter file into sp_flashtool. Sp Flashtool detects my device as mt6765, so I used wwr to create scatter for mt6765 loaded it into spflashtool but when i try to readback i get this error STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)
(14-12-2019, 06:48 PM)X3non(14-12-2019, 03:22 PM)mencoronaldo I succeeded in unlocking the bootloader but unable to load mt6762 scatter file into sp_flashtool. Sp Flashtool detects my device as mt6765, so I used wwr to create scatter for mt6765 loaded it into spflashtool but when i try to readback i get this error STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)
is there an error message if you use an mt6762 scatter file in sp flash tool?
and what about reading firmware using miracle thunder?
(14-12-2019, 07:16 PM)mencoronaldo Error messages on sp_flashtool (mt6762) and miracle thunder 2.82
(16-12-2019, 01:13 PM)X3nonHow do i know the address and length of pgpt?(14-12-2019, 07:16 PM)mencoronaldo Error messages on sp_flashtool (mt6762) and miracle thunder 2.82
for miracle, i'd advise you try a few more times to see if its the same error but it seems to have halted at preloader just like spft did
for spft, skip preloader for now and try reading from emmc_user (ie pgpt first then full emmc dump after you get the full length address). i think reading preloader is somehow not supported or blocked
(16-12-2019, 01:40 PM)mencoronaldoI've tried the read back of pgpt (EMMC_USER, 0x0, 0x80000) using spft but i get the same error as before(16-12-2019, 01:13 PM)X3nonHow do i know the address and length of pgpt?(14-12-2019, 07:16 PM)mencoronaldo Error messages on sp_flashtool (mt6762) and miracle thunder 2.82
for miracle, i'd advise you try a few more times to see if its the same error but it seems to have halted at preloader just like spft did
for spft, skip preloader for now and try reading from emmc_user (ie pgpt first then full emmc dump after you get the full length address). i think reading preloader is somehow not supported or blocked
(16-12-2019, 01:49 PM)mencoronaldo I've tried the read back of pgpt (EMMC_USER, 0x0, 0x80000) using spft but i get the same error as before
(16-12-2019, 01:49 PM)mencoronaldo I've tried the read back of pgpt (EMMC_USER, 0x0, 0x80000) using spft but i get the same error as before
(16-12-2019, 01:49 PM)mencoronaldo I've tried the read back of pgpt (EMMC_USER, 0x0, 0x80000) using spft but i get the same error as before