Hovatek Forum MOBILE Android need infinix x624b X624B-H8026IJK-O-190620V239 firmware pls
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


need infinix x624b X624B-H8026IJK-O-190620V239 firmware pls

need infinix x624b X624B-H8026IJK-O-190620V239 firmware pls

29-11-2019, 09:41 AM
#1



need infinix x624b X624B-H8026IJK-O-190620V239 firmware pls
Brand = Infinix
Manufacturer = INFINIX MOBILITY LIMITED
Model = Infinix-X624B
Model = Infinix X624B
CPU Abi = armeabi-v7a
Android release = 8.1.0
Firmware version = X624B-H8026IJK-O-190620V239
Firmware date = Thu Jun 20 17:32:25 CST 2019
xerxes
xerxes
xerxes
Senior Member
8,355
29-11-2019, 09:39 PM
#2
(29-11-2019, 09:41 AM)Tilahun Workiye Dereje need infinix x624b X624B-H8026IJK-O-190620V239 firmware pls
Brand = Infinix
Manufacturer = INFINIX MOBILITY LIMITED
Model = Infinix-X624B
Model = Infinix X624B
CPU Abi = armeabi-v7a
Android release = 8.1.0
Firmware version = X624B-H8026IJK-O-190620V239
Firmware date = Thu Jun 20 17:32:25 CST 2019

The firmware for your exact build is not available.
But you can try any of the firmware with “X624B-H8026IJK-O-190” @ https://www.hovatek.com/forum/thread-27034.html starting with highest build.

Btw, is there anything wrong with your device?
This post was last modified: 29-11-2019, 09:39 PM by xerxes.
04-12-2019, 06:22 PM
#3
new phone afteremove emmc bucup with emmc tool and returned the phone dead then i use factory da and aut file after loading boot erasing not initiated if i get stock firmware thats whay i requested x624b v239 firmware
X3non
X3non
X3non
Recognized Contributor
22,062
04-12-2019, 07:55 PM
#4
(04-12-2019, 06:22 PM)Tilahun Workiye Dereje new phone afteremove emmc bucup with emmc tool and returned the phone dead then i use factory da and aut file after loading boot erasing not initiated  if i get stock firmware thats whay i requested  x624b v239 firmware

what operation did you carry out using emmc tool?
what was wrong with the phone before you removed the emmc?
04-12-2019, 08:12 PM
#5



first i have one hung logo phone after flash with v223 dead then i bring brand new phone remove emmc dump boot partitions boot,1,2,3 then install back to phone but phone dose not start faild to initialise preloader f...st enable dram faild
This post was last modified: 04-12-2019, 08:15 PM by Tilahun Workiye Dereje.
xerxes
xerxes
xerxes
Senior Member
8,355
04-12-2019, 09:50 PM
#6
(04-12-2019, 08:12 PM)Tilahun Workiye Dereje first i have one hung logo phone after flash with v223 dead then i bring brand new phone remove emmc dump boot partitions boot,1,2,3 then install back to phone but phone dose not start faild to initialise preloader f...st enable dram faild

Have you tried disconnecting/reconnecting the phone’s battery and charge for few hours after flashing?
Also, you can try disconnecting/reconnecting the battery before flashing that fixes dram error sometimes.
This post was last modified: 04-12-2019, 09:51 PM by xerxes.
X3non
X3non
X3non
Recognized Contributor
22,062
05-12-2019, 01:15 PM
#7
(04-12-2019, 08:12 PM)Tilahun Workiye Dereje first i have one hung logo phone after flash with v223 dead then i bring brand new phone remove emmc dump boot partitions boot,1,2,3 then install back to phone but phone dose not start faild to initialise preloader f...st enable dram faild

the phone you took the emmc from to read boot from remains dead even after putting emmc back?
if yes, it must mean you didn't fix the emmc back properly. take it out again and retry
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram