Hovatek Forum MOBILE Android Tecno k8 clone
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Tecno k8 clone

Tecno k8 clone

Pages (2): Previous 1 2
prince1111
prince1111
prince1111
Senior Member
608
22-10-2019, 02:09 PM
#11



Yes the firmware version change after flashing I even select format + download but the phone still hang on logo.


Sent from my GT-N7100 using Hovatek Mobile
prince1111
prince1111
prince1111
Senior Member
608
22-10-2019, 02:39 PM
#12
[attachment=7174 [attachment=7174]prince1111 pid='180301' dateline='1571749788']Yes the firmware version change after flashing I even select format + download but the phone still hang on logo.


Sent from my GT-N7100 using Hovatek Mobile
prince1111
prince1111
prince1111
Senior Member
608
22-10-2019, 02:42 PM
#13
[attachment=7174] that's the screen shot of the error in recovery
freshtyt
freshtyt
freshtyt
Senior Member
2,949
22-10-2019, 10:11 PM
#14
(22-10-2019, 02:42 PM)prince1111 that's the screen shot of the error in recovery

what about wiping emmc in factory mode, did you try it?
or try using a hardware dongle tool to format?
prince1111
prince1111
prince1111
Senior Member
608
23-10-2019, 10:22 AM
#15



I don't have hardware dongle tool
Wiping emmc says failed to wipe

Sent from my GT-N7100 using Hovatek Mobile
freshtyt
freshtyt
freshtyt
Senior Member
2,949
23-10-2019, 03:27 PM
#16
(23-10-2019, 10:22 AM)prince1111 I don't have hardware dongle tool
Wiping emmc says failed to wipe

Sent from my GT-N7100 using Hovatek Mobile

use any of the firmwares you have, format all except bootloader using sp flash tool then without flashing the firmware check if the phone can still power on or not
prince1111
prince1111
prince1111
Senior Member
608
29-10-2019, 10:38 AM
#17
It only keep on  vibration after 10second it want off again
I format all except boot loader.
And it wont boot or show anythin Thanks.
And if I reload the techno firmware that was previous on the phone which I bakup, it come up and hang on logo as it is before.
If I still use the oppo file that downloaded it wil still hang on logo

Sent from my TECNO DP7CPRO using Hovatek Mobile
xerxes
xerxes
xerxes
Senior Member
8,355
29-10-2019, 06:47 PM
#18
(29-10-2019, 10:38 AM)prince1111 It only keep on  vibration after 10second it want off again
I format all except boot loader.
And it wont boot or show anythin Thanks.
And if I reload the techno firmware that was previous on the phone which I bakup, it come up and hang on logo as it is before.
If I still use the oppo file that downloaded it wil still hang on logo

Sent from my TECNO DP7CPRO using Hovatek Mobile

This is a clone phone, getting its compatible firmware will be difficult.
you’ll need to keep combining firmware you download online or look for a working device of the same model to backup it’s firmware.
johnchinonso21@gmail.com
johnchinonso21@gmail.com
johnchinonso21@gmail.com
Junior Member
19
09-04-2020, 10:05 AM
#19
flashed without skipping preloader and a factory reset afterwards and it worked for me
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram