Hovatek Forum MOBILE Android Techno w3/ 6.0/ mra58k/w3-H806A1-m-161122v94
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Techno w3/ 6.0/ mra58k/w3-H806A1-m-161122v94

Techno w3/ 6.0/ mra58k/w3-H806A1-m-161122v94

Pages (2): 1 2 Next
prince1111
prince1111
prince1111
Senior Member
608
30-09-2019, 09:44 AM
#1



This phone got stock on boot logo I performed a factory reset and still not working, I download the firmware at hovatek still not working, and the lucky part of the trouble shooting is the phone is still alive. Pls help me with this phone.

Sent from my GT-N7100 using Hovatek Mobile
Noblex
Noblex
Noblex
Respected Member
111
30-09-2019, 10:13 AM
#2
(30-09-2019, 09:44 AM)prince1111 This phone got stock on boot logo I performed a factory reset and still not working, I download the firmware at hovatek still not working, and the lucky part of the trouble shooting is the phone is still alive. Pls help me with this phone.

Sent from my GT-N7100 using Hovatek Mobile

What's the initial phone build number before flashing firmware to the it

Sent from my TECNO CX Air using Hovatek Mobile
prince1111
prince1111
prince1111
Senior Member
608
30-09-2019, 12:37 PM
#3
H806a1_m_161122v94
  • That's the official build number sir, 

Sent from my GT-N7100 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
30-09-2019, 06:41 PM
#4
(30-09-2019, 09:44 AM)prince1111 This phone got stock on boot logo I performed a factory reset and still not working, I download the firmware at hovatek still not working, and the lucky part of the trouble shooting is the phone is still alive. Pls help me with this phone.

Sent from my GT-N7100 using Hovatek Mobile

how did the phone get bricked in the first place?
which particular firmware build did you flash? was flashing the firmware successful? if yes, did you factory reset the phone in recovery mode after flashing successfully?
prince1111
prince1111
prince1111
Senior Member
608
30-09-2019, 09:32 PM
#5



The phone  is not yet brick it still powering on,  I flash the firmware it goes successfully and I perform a factory reset in recovery Mode as well but still stuck on logo. I try flashing it via sp flash tool also miracle box the same thing.

Sent from my GT-N7100 using Hovatek Mobile
xerxes
xerxes
xerxes
Senior Member
8,355
30-09-2019, 10:36 PM
#6
(30-09-2019, 09:32 PM)prince1111 The phone  is not yet brick it still powering on,  I flash the firmware it goes successfully and I perform a factory reset in recovery Mode as well but still stuck on logo. I try flashing it via sp flash tool also miracle box the same thing.

Sent from my GT-N7100 using Hovatek Mobile
Have you tried reading the phone's info using Miracle Box and see if build no changed after flashing?
prince1111
prince1111
prince1111
Senior Member
608
01-10-2019, 04:42 AM
#7
Yes I read the phone information after flashing and the build number still showing d same thing

Sent from my GT-N7100 using Hovatek Mobile
olakunal
olakunal
olakunal
Junior Member
37
01-10-2019, 09:11 AM
#8
(01-10-2019, 04:42 AM)prince1111 Yes I read the phone information after flashing and the build number still showing d same thing

Sent from my GT-N7100 using Hovatek Mobile
Reboot to stock recovery mode, wipe cache partition then reboot to system.
X3non
X3non
X3non
Recognized Contributor
22,062
01-10-2019, 11:50 AM
#9
(30-09-2019, 09:32 PM)prince1111 The phone  is not yet brick it still powering on,  I flash the firmware it goes successfully and I perform a factory reset in recovery Mode as well but still stuck on logo. I try flashing it via sp flash tool also miracle box the same thing.

Sent from my GT-N7100 using Hovatek Mobile

the term brick could refer to soft brick (stuck at bootlogo, bootloop, booting to recovery) or hard brick (totally dead)
if you're 100% sure that the firmware build you flash was the exact same one previously on the phone and you've performed a factory reset after flashing firmware, then the emmc chip is faulty
prince1111
prince1111
prince1111
Senior Member
608
01-10-2019, 03:26 PM
#10



How do fix the emmc any video clip will help or guide way.  Thanks

Sent from my GT-N7100 using Hovatek Mobile
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram