[plkmnz]

The above phone is a mix of different firmwares or just confusing. It reads MTK6572 NAND on SP Tools. I have been searching for this firmware  (F2-VP510ABC-N-180304V7) but all I get is MTK6850 chipset based firmwares which are EMMC. How can I fix the scatter file to load and reflash the present phone which got bricked as a result of wrong firmware, or is there a compatible ROM that suits this type of chinese phone. I tried looking for clones but still no response. Which is the best way to get this phone up and running?

[X3non]

The above phone is a mix of different firmwares or just confusing. It reads MTK6572 NAND on SP Tools. I have been searching for this firmware  (F2-VP510ABC-N-180304V7) but all I get is MTK6850 chipset based firmwares which are EMMC. How can I fix the scatter file to load and reflash the present phone which got bricked as a result of wrong firmware, or is there a compatible ROM that suits this type of chinese phone. I tried looking for clones but still no response. Which is the best way to get this phone up and running?

yours is actually a clone, based on chipset and sticker on the battery which reads 32+2 when original f2lte is 8+1 and emmc storage
readinfo using miracle then post the outcome

[plkmnz]

I cannot readinfo since the phone got bricked while trying to install a firmware on it (I thought it would flash with tecno P1 clone), now all it does is detect Mediatek Driver from the computer (Computer reads MTK Driver Successful connection) but nothing else, or maybe I might be doing something wrong with readinfo. I open Miracle Box 2.27, MTK tab, select 4th, 8th and even 11 boot but in vain. Ave just tried the rest but still no response. How did it get loaded with these crazy details?

What do I do to revive it?

Is there a better, older firmware that I can load it on this clone?

[X3non]

I cannot readinfo since the phone got bricked while trying to install a firmware on it (I thought it would flash with tecno P1 clone), now all it does is detect Mediatek Driver from the computer (Computer reads MTK Driver Successful connection) but nothing else, or maybe I might be doing something wrong with readinfo. I open Miracle Box 2.27, MTK tab, select 4th, 8th and even 11 boot but in vain. Ave just tried the rest but still no response. How did it get loaded with these crazy details?

What do I do to revive it?

Is there a better, older firmware that I can load it on this clone?

you will only end up making things worse trying random firmwares
what was the condition of the phone before you tried the P1 clone firmware: totally dead or stuck at boot?
was flashing the P1 clone firmware successful or it got interrupted by an error & failed?
can you get access to a working phone same clone model as the bricked one?
btw, try peeling off the sticker from beneath the battery compactment, see if you'll find another that states the real phone model

[plkmnz]

The clone was basically not working from loading apps, playing music, videos and even getting into messenger was not functional (It was reading 32GB storage and weird not even a 5MB app could install) so I thought flashing it would be the right solution. Also it was switching off while on call so another main reason for flashing. I have removed the behind sticker but its blank behind it, so I will unscrew it and check the motherboard, maybe that can help in identifying what model it is.

When I flashed it with P1 clone firmware it successfully loaded but upon booting, it showed nothing but vibration, which then, I formated it. Maybe a mistake.

[X3non]

The clone was basically not working from loading apps, playing music, videos and even getting into messenger was not functional (It was reading 32GB storage and weird not even a 5MB app could install) so I thought flashing it would be the right solution. Also it was switching off while on call so another main reason for flashing. I have removed the behind sticker but its blank behind it, so I will unscrew it and check the motherboard, maybe that can help in identifying what model it is.

When I flashed it with P1 clone firmware it successfully loaded but upon booting, it showed nothing but vibration, which then, I formated it. Maybe a mistake.

if there's no useful info after dismantling, then you'll need to look for a working phone same clone model as the bricked one to backup firmware from then flash the backup to yours

[plkmnz]

Okay will look for one. thanks.

[LINK TECH]

The above phone is a mix of different firmwares or just confusing. It reads MTK6572 NAND on SP Tools. I have been searching for this firmware  (F2-VP510ABC-N-180304V7) but all I get is MTK6850 chipset based firmwares which are EMMC. How can I fix the scatter file to load and reflash the present phone which got bricked as a result of wrong firmware, or is there a compatible ROM that suits this type of chinese phone. I tried looking for clones but still no response. Which is the best way to get this phone up and running?

yours is actually a clone, based on chipset and sticker on the battery which reads 32+2 when original f2lte is 8+1 and emmc storage
readinfo using miracle then post the outcome

[X3non]

...

this is someone's elses thread, create a new thread for your device issue
create a new thread for your device issue by clicking "Ask Question" at the top