Hovatek Forum MOBILE Android [Please help] help unbrick tecno ca7
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] help unbrick tecno ca7

[Please help] help unbrick tecno ca7

Davie254
Davie254
Davie254
Junior Member
21
09-08-2019, 12:10 AM
#1



i was trying to follow this tutoria  https://www.hovatek.com/forum/thread-290...pid175195l  today and i bricked my phone when doing the first readback i followed every single step and i powered of my phone to do the read back but oops thats the last time i saw my phone.

the readback was not succesful cz i received this error ERROR:_STATUS_BROM_CMD_STARTCMD_FAIL_(0xC00600001)
I used the first custom Da for tecno camon x these were the softwares i used
1) wwr_2.51_eng
2)sp flash tool 5.1820
3)tecno ca7 DA 
4) had installed drivers with auto driver install and configured the as MEDIATEK DA USB VCOM DRIVER
i am using windows 10 and i have also tried to flash on windows 7 and that the same error
again one thing i have also noted is that my phone doesnt disconect itself from the pc as much as its plugged in its connected as MEDIATEK DA USB VCOM PORT.
so somebody help me overcome this plz
X3non
X3non
X3non
Recognized Contributor
22,062
09-08-2019, 12:45 PM
#2
(09-08-2019, 12:10 AM)Davie254 ...

the backup process was interrupted, refer to https://www.hovatek.com/forum/thread-808.html
hovatek
hovatek
hovatek
Administrator
49,570
10-08-2019, 10:11 AM
#3
(09-08-2019, 12:10 AM)Davie254 i was trying to follow this tutoria  https://www.hovatek.com/forum/thread-290...pid175195l  today and i bricked my phone when doing the first readback i followed every single step and i powered of my phone to do the read back but oops thats the last time i saw my phone.

the readback was not succesful cz i received this error ERROR:_STATUS_BROM_CMD_STARTCMD_FAIL_(0xC00600001)
I used the first custom Da for tecno camon x these were the softwares i used
1) wwr_2.51_eng
2)sp flash tool 5.1820
3)tecno ca7 DA 
4) had installed drivers with auto driver install and configured the as MEDIATEK DA USB VCOM DRIVER
i am using windows 10 and i have also tried to flash on windows 7 and that the same error
again one thing i have also noted is that my phone doesnt disconect itself from the pc as much as its plugged in its connected as MEDIATEK DA USB VCOM PORT.
so somebody help me overcome this plz

Once the phone comes up, try the second DA

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
YGS
YGS
YGS
Techie Member
58
19-08-2019, 05:30 AM
#4
(09-08-2019, 12:10 AM)Davie254 i was trying to follow this tutoria  https://www.hovatek.com/forum/thread-290...pid175195l  today and i bricked my phone when doing the first readback i followed every single step and i powered of my phone to do the read back but oops thats the last time i saw my phone.

the readback was not succesful cz i received this error ERROR:_STATUS_BROM_CMD_STARTCMD_FAIL_(0xC00600001)
I used the first custom Da for tecno camon x these were the softwares i used
1) wwr_2.51_eng
2)sp flash tool 5.1820
3)tecno ca7 DA 
4) had installed drivers with auto driver install and configured the as MEDIATEK DA USB VCOM DRIVER
i am using windows 10 and i have also tried to flash on windows 7 and that the same error
again one thing i have also noted is that my phone doesnt disconect itself from the pc as much as its plugged in its connected as MEDIATEK DA USB VCOM PORT.
so somebody help me overcome this plz
Then why you readback for backup ROM since the official firmware for your phone available on internet?
you might do the backup procedure with WWR and ReadBack your firmware with spft tools if you can't or hard to find your official firmware on internet.
This post was last modified: 19-08-2019, 05:32 AM by YGS.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram