Hovatek Forum MOBILE Android ALCATEL POP NOT BOOTING
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


ALCATEL POP NOT BOOTING

ALCATEL POP NOT BOOTING

Pages (2): 1 2 Next
man138
man138
man138
Experienced Member
99
23-04-2019, 07:37 PM
#1



My phone Alcatel pop just went off all of a sudden and refused to boot on, it blinks the notification light whenever it's plugged in the charger but doesn't boot on. Below are the phone information:

ALCATEL POP
Alcatel 5051D
5051D-ZAALAV1-2
Bluetooth Declaration ID D026715
N ABE 41KD 11 FLZ

HT_SH0919_CM231_A3
NOTE: all the above phone info was written at the back of the phone as I couldn't get access to inside the phone. Please give me procedures on how to flash it.

Sent from my Infinix X606 using Tapatalk
X3non
X3non
X3non
Recognized Contributor
22,062
24-04-2019, 09:30 AM
#2
(23-04-2019, 07:37 PM)man138 My phone Alcatel pop just went off all of a sudden and refused to boot on, it blinks the notification light whenever it's plugged in the charger but doesn't boot on. Below are the phone information:

ALCATEL POP
Alcatel 5051D
5051D-ZAALAV1-2
Bluetooth Declaration ID D026715
N ABE 41KD 11 FLZ

HT_SH0919_CM231_A3
NOTE: all the above phone info was written at the back of the phone as I couldn't get access to inside the phone. Please give me procedures on how to flash it.

Sent from my Infinix X606 using Tapatalk

before you jump to flashing, have you tried disconnecting / reconnecting the battery then charging it properly? OR tried a different battery?
man138
man138
man138
Experienced Member
99
24-04-2019, 02:59 PM
#3
(24-04-2019, 09:30 AM)X3non
(23-04-2019, 07:37 PM)man138 My phone Alcatel pop just went off all of a sudden and refused to boot on, it blinks the notification light whenever it's plugged in the charger but doesn't boot on. Below are the phone information:

ALCATEL POP
Alcatel 5051D
5051D-ZAALAV1-2
Bluetooth Declaration ID D026715
N ABE 41KD 11 FLZ

HT_SH0919_CM231_A3
NOTE: all the above phone info was written at the back of the phone as I couldn't get access to inside the phone. Please give me procedures on how to flash it.

Sent from my Infinix X606 using Tapatalk

before you jump to flashing, have you tried disconnecting / reconnecting the battery then charging it properly? OR tried a different battery?
I am not able to test other battery as the phone ain't popular but I have removed and reinserted the battery and charged well but still yet. No access to any battery and nothing seems to work. Please give me any working idea

Sent from my Infinix X606 using Tapatalk
X3non
X3non
X3non
Recognized Contributor
22,062
24-04-2019, 06:17 PM
#4
(24-04-2019, 02:59 PM)man138 I am not able to test other battery as the phone ain't popular but I have removed and reinserted the battery and charged well but still yet. No access to any battery and nothing seems to work. Please give me any working idea

Sent from my Infinix X606 using Tapatalk

then try flashing firmware
download firmware @ https://www.hovatek.com/forum/thread-13300.html
flash using qfil @ https://www.hovatek.com/forum/thread-22466.html
man138
man138
man138
Experienced Member
99
25-04-2019, 04:57 PM
#5



(24-04-2019, 06:17 PM)X3non
(24-04-2019, 02:59 PM)man138 I am not able to test other battery as the phone ain't popular but I have removed and reinserted the battery and charged well but still yet. No access to any battery and nothing seems to work. Please give me any working idea

Sent from my Infinix X606 using Tapatalk

then try flashing firmware
download firmware @ https://www.hovatek.com/forum/thread-13300.html
flash using qfil @ https://www.hovatek.com/forum/thread-22466.html
Can an Alcatel phone which doesn't boot on boot into EDL (EMERGENCY DOWNLOAD)?

Sent from my Infinix X606 using Tapatalk
X3non
X3non
X3non
Recognized Contributor
22,062
26-04-2019, 10:30 AM
#6
(25-04-2019, 04:57 PM)man138 Can an Alcatel phone which doesn't boot on boot into EDL (EMERGENCY DOWNLOAD)?

Sent from my Infinix X606 using Tapatalk

use test points to boot to edl mode
[Image: Screenshot-347.png]
man138
man138
man138
Experienced Member
99
11-05-2019, 05:08 PM
#7
I HAVE TRIED TO FLASH THE ALCATEL POP 5051D USING THE LOADER AND FIRMWARE I DOWNLOADED BUT WHENEVER I TRIED TO SELECT THE FIRMWARE FROM THE LOADER I CANT FIND ANYTHING. IF I CHECK THE FIRMWARE FOLDER EVERYTHING IS ALWAYS COMPLETE BUT UPON CLICKING THE BROWSE ICON IN THE QFIL I DONT USUALLY SEE ANYTHING PLEASE HELP.

BELOW ARE THE SCREENSHOT OF ALL THE FILES PRESENT IN THE FIRMWARE FOLDER ALSO THE FILE WAS CREATED BY INFINITY BOX
Attached Files
.png
alcatel pop firmware screenshot.PNG
Size: 157.59 KB / Downloads: 10
.png
alcatel pop file creator.PNG
Size: 16.65 KB / Downloads: 8
man138
man138
man138
Experienced Member
99
11-05-2019, 05:23 PM
#8
HERE IS ALSO A SCREENSHOT TO SHOW THAT THE DEVICE WAS SUCCESSFULLY CONNECTED TO THE QUALCOMM IMAGE LOADER
Attached Files
.png
AFTER CONNECTION.PNG
Size: 21.72 KB / Downloads: 10
X3non
X3non
X3non
Recognized Contributor
22,062
12-05-2019, 10:42 PM
#9
(11-05-2019, 05:08 PM)man138 I HAVE TRIED TO FLASH THE ALCATEL POP 5051D USING THE LOADER AND FIRMWARE I DOWNLOADED BUT WHENEVER I TRIED TO SELECT THE FIRMWARE FROM THE LOADER I CANT FIND ANYTHING. IF I CHECK THE FIRMWARE FOLDER EVERYTHING IS ALWAYS COMPLETE BUT UPON CLICKING THE BROWSE ICON IN THE QFIL I DONT USUALLY SEE ANYTHING PLEASE HELP.

BELOW ARE THE SCREENSHOT OF ALL THE FILES PRESENT IN THE FIRMWARE FOLDER ALSO THE FILE WAS CREATED BY INFINITY BOX

infinity box program doesn't copy out the firehorse programmer file and even if it did, the file probably be encrypted for use only on infinity box. its either you flash the firmware in your screenshot using infinity box cm2qlm OR look for the right programmer file to use in qfil tool (you will need to rename infinity_program0 to raw_program0); you can try programmer files for your chipset type listed @ https://www.hovatek.com/forum/thread-25696.html one might work for your model
man138
man138
man138
Experienced Member
99
12-05-2019, 11:33 PM
#10



(12-05-2019, 10:42 PM)X3non
(11-05-2019, 05:08 PM)man138 I HAVE TRIED TO FLASH THE ALCATEL POP 5051D USING THE LOADER AND FIRMWARE I DOWNLOADED BUT WHENEVER I TRIED TO SELECT THE FIRMWARE FROM THE LOADER I CANT FIND ANYTHING. IF I CHECK THE FIRMWARE FOLDER EVERYTHING IS ALWAYS COMPLETE BUT UPON CLICKING THE BROWSE ICON IN THE QFIL I DONT USUALLY SEE ANYTHING PLEASE HELP.

BELOW ARE THE SCREENSHOT OF ALL THE FILES PRESENT IN THE FIRMWARE FOLDER ALSO THE FILE WAS CREATED BY INFINITY BOX

infinity box program doesn't copy out the firehorse programmer file and even if it did, the file probably be encrypted for use only on infinity box. its either you flash the firmware in your screenshot using infinity box cm2qlm OR look for the right programmer file to use in qfil tool (you will need to rename infinity_program0 to raw_program0); you can try programmer files for your chipset type listed @ https://www.hovatek.com/forum/thread-25696.html one might work for your model
I downloaded the file from the link given to me earlier on, what do you think I should do now?
Is their infinity box crack I can download?
Please help me out with an easy option.

Sent from my Infinix X606 using Tapatalk
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram