[fashkay]

Hello guys, there is this Camon CX MT6750 which is fRp locked I tried to flash the fRp extracted from another phone via spflash tools since then, the phone is not coming up neither is it charging.
All stock rom i have downloaded with sp flash tool is stucked at the red line DA 100% and it will finally return an error "status Ram exception"
I recently got same phone type and I dumped the firmware using CM2 and when I tried flashing, it brought out an error "da error dram configure failed cm2"

Please help me the phone is in dead mode but PC can still recognise and communicate with it.

[X3non]

Hello guys, there is this Camon CX MT6750 which is fRp locked I tried to flash the fRp extracted from another phone via spflash tools since
...
Please help me the phone is in dead mode but PC can still recognise and communicate with it.

did you flash any other files / partitions aside from frp?
was flashing successful with a green tick?
have you tried disconnecting / reconnecting the battery of the phone?

[fashkay]

Hello guys, there is this Camon CX MT6750 which is fRp locked I tried to flash the fRp extracted from another phone via spflash tools since
...
Please help me the phone is in dead mode but PC can still recognise and communicate with it.

did you flash any other files / partitions aside from frp?
was flashing successful with a green tick?
have you tried disconnecting / reconnecting the battery of the phone?

Yes there was a preloader and the green light was ticked...

[X3non]

Yes there was a preloader and the green light was ticked...

did you confirm that both phones had the same build number?

if yes and they both matched, then disconnect / reconnect the battery, the phone should power on

but if no, then disconnect / reconnect the battery then check if the phone powers on
if it doesn't come on, then try flashing preloader from other builds @ https://www.hovatek.com/forum/thread-19410.html