[kaew158]

How to convert dumped firmware from Infinity box cm2qlm to flash on QFIL or Miflash?
And
How to get prog emmc firehorse msm8952.mbn?

[X3non]

How to convert dumped firmware from Infinity box cm2qlm to flash on QFIL or Miflash?
And
How to get prog emmc firehorse msm8952.mbn?

search online for programmer file for your device model OR you can try those listed for your chipset @ https://www.hovatek.com/forum/thread-25696.html

[kaew158]

Any way to convert dumped firmware from cm2qlm box ?
Thank you.

[X3non]

Any way to convert dumped firmware from cm2qlm box ?
Thank you.

if you have rawprogram0 & programmer file then there's nothing else you really need qfil, you still need to confirm the files are not encrypted
you can unpack recovery or boot using the guide @ https://www.hovatek.com/forum/thread-15817.html
if unpack is successful then files are not encrypted, if unpack fails then files are encrypted and can only be flashed using the dongle

[hovatek]

Any way to convert dumped firmware from cm2qlm box ?
Thank you.

Lets see a screenshot of the files in your CM2 QLM dump

[kaew158]

I have not rawprogram0 , patch0 and programmer files. Inside dumped firmware has only infinity_program0 file. Please any guide to flash this file.

[X3non]

I have not rawprogram0 , patch0 and programmer files. Inside dumped firmware has only infinity_program0 file. Please any guide to flash this file.

infinity_program0 is same as rawprogram0
patch0 should not be needed if your rom does not have it
programmer file -- this one you will have to search for and try till you get a working on. you can start with the list in the link i sent

[hovatek]

I have not rawprogram0 , patch0 and programmer files. Inside dumped firmware has only infinity_program0 file. Please any guide to flash this file.

Do you have NCK box or UMT?

[kaew158]

I did not have any box or dongle. I was try your programmer files but got fail.
Please advice me.

[X3non]

I did not have any box or dongle. I was try your programmer files but got fail.
Please advice me.

if you're getting sahara error then you need to either keep searching for and trying programmer OR look for someone having cm2 dongle around you to help you out