Join us on Tl   Wh

Hovatek Forum DEVELOPMENT Android Tecno spark 2 KA7 (1 gb) request custom recovery

Tecno spark 2 KA7 (1 gb) request custom recovery

Tecno spark 2 KA7 (1 gb) request custom recovery

Pages (2): 1 2 Next
josh254
josh254
josh254
Enthusiastic Member
7
11-02-2019, 02:24 PM
#1



Hi
I've been trying to root my phone (tecno spark 2 KA7 1 gb ) with no success.Ive tried a few custom recoveries out there but none works I've also tried patching stock with magisk which also failed
I did all this via adb(unlocked bootloader) since sp flash tool requires DA files
If anyone can share a working custom recovery or port one plz help

Any leads to the right direction will be appreciated
Thanks in advance

Sent from my TECNO KA7 using Hovatek Mobile
hovatek
hovatek
hovatek
Administrator
49,767
11-02-2019, 08:21 PM
#2
(11-02-2019, 02:24 PM)josh254 Hi
I've been trying to root my phone (tecno spark 2 KA7 1 gb ) with no success.Ive tried a few custom recoveries out there but none works I've also tried patching stock with magisk which also failed
I did all this via adb(unlocked bootloader) since sp flash tool requires DA files
If anyone can share a working custom recovery or port one plz help

Any leads to the right direction will be appreciated
Thanks in advance

Sent from my TECNO KA7 using Hovatek Mobile

you don't necessarily need a custom recovery to root
what error did you get while using magisk method to root? and at what point exactly?
josh254
josh254
josh254
Enthusiastic Member
7
12-02-2019, 05:01 AM
#3
[quote="X3non" pid='160715' dateline='1549912876']
[quote='josh254' pid='160689' dateline='1549891488']
Hi
I've been trying to root my phone (tecno spark 2 KA7 1 gb ) with no success.Ive tried a few custom recoveries out there but none works I've also tried patching stock with magisk which also failed
I did all this via adb(unlocked bootloader) since sp flash tool requires DA files
If anyone can share a working custom recovery or port one plz help

Any leads to the right direction will be appreciated
Thanks in advance


you don't necessarily need a custom recovery to root
what error did you get while using magisk method to root? and at what point exactly?




Everytime I flashed the recovery via adb it goes through successfully but when I reboot recovery I'm still at KA7 stock



Sent from my TECNO KA7 using Hovatek Mobile
This post was last modified: 12-02-2019, 05:02 AM by josh254.
shankar1790
shankar1790
shankar1790
Senior Member
474
12-02-2019, 06:58 AM
#4
Flash the recovery from fastboot then power off device (remove battery if it removable ) wait for some seconds then reboot to recovery via hardware key.
josh254
josh254
josh254
Enthusiastic Member
7
12-02-2019, 08:38 AM
#5



(12-02-2019, 06:58 AM)shankar1790 Flash the recovery from fastboot then power off device (remove battery if it removable ) wait for some seconds then reboot to recovery via hardware key.

Battery is built in I've done what you've suggested(without removing the battery of course)with no success
I've rooted a few phones I don't have problems with the actual method I'm just trying to find a working custom recovery for this phone

Sent from my TECNO KA7 using Hovatek Mobile
xerxes
xerxes
xerxes
Senior Member
8,357
12-02-2019, 10:06 AM
#6
(12-02-2019, 08:38 AM)josh254
(12-02-2019, 06:58 AM)shankar1790 Flash the recovery from fastboot then power off device (remove battery if it removable ) wait for some seconds then reboot to recovery via hardware key.

Battery is built in I've done what you've suggested(without removing the battery of course)with no success
I've rooted a few phones I don't have problems with the actual method I'm just trying to find a working custom recovery for this phone

Sent from my TECNO KA7 using Hovatek Mobile

where did you get the custom recovery you flashed and was it ported for your phone's build? 
Tecno Spark 2 Download Agent is listed @ https://www.hovatek.com/forum/thread-23243.html , you can flash the philz recovery with sp flash tool. 
State the phone's build no.
hovatek
hovatek
hovatek
Administrator
49,767
12-02-2019, 11:14 AM
#7
(12-02-2019, 05:01 AM)josh254 Everytime I flashed the recovery via adb it goes through successfully but when I reboot recovery I'm still at KA7 stock

Sent from my TECNO KA7 using Hovatek Mobile
As i mentioned earlier, you don't necessarily need a custom recovery to root
root using the guide @ https://www.hovatek.com/forum/thread-21427.html

if you don't have the stock rom / firmware for your phone's exact build number, then backup using the guide @ https://www.hovatek.com/forum/thread-21970.html
you can download DA for your model @ https://www.hovatek.com/forum/thread-23243.html to perform the backup
josh254
josh254
josh254
Enthusiastic Member
7
12-02-2019, 12:41 PM
#8

where did you get the custom recovery you flashed and was it ported for your phone's build? 
Tecno Spark 2 Download Agent is listed @ https://www.hovatek.com/forum/thread-23243.html , you can flash the philz recovery with sp flash tool. 
State the phone's build no.

Can you link me to the Philz recovery plz

My build no : KA7-H8024ABC-GO-181227V193


Sent from my TECNO KA7 using Hovatek Mobile
josh254
josh254
josh254
Enthusiastic Member
7
12-02-2019, 12:46 PM
#9

As i mentioned earlier, you don't necessarily need a custom recovery to root
root using the guide @ https://www.hovatek.com/forum/thread-21427.html

if you don't have the stock rom / firmware for your phone's exact build number, then backup using the guide @ https://www.hovatek.com/forum/thread-21970.html
you can download DA for your model @ https://www.hovatek.com/forum/thread-23243.html to perform the backup
[/quote]
I did exactly that patched my stock with magisk and flashed it via adb it was successful but when I rebooted and opened magisk app it still said magisk is not installed plus when I reboot recovery it was still at KA7 stock



Sent from my TECNO KA7 using Hovatek Mobile
hovatek
hovatek
hovatek
Administrator
49,767
12-02-2019, 06:01 PM
#10
(12-02-2019, 12:46 PM)josh254 I did exactly that patched my stock with magisk and flashed it via adb it was successful but when I rebooted and opened magisk app it still said magisk is not installed plus when I reboot recovery it was still at KA7 stock

Sent from my TECNO KA7 using Hovatek Mobile

do you have firmware or stock rom backup for your phone's build number? or you're using files from a different KA7 build?
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt