[Emmy Chizzy112]

i need link to dooge x10 firmware
BUILD NUMBER VO JL50030-24 2017/10/19 A3
THANKS IN ADVANCE

[EMMANUS]

What is wrong with the device?
How did the issue start?

These may require password
https://mega.nz/#!cb4wzLbD!ug1BqwMfuzEv6...6X9K2g3OOc
https://mega.nz/#!hNEjnYyZ!dcZwaCqJRYJ_I...ghyA4hN_Ao (if applicable ,password=www.freemobilefirmware.com)

[Emmy Chizzy112]

What is wrong with the device?
How did the issue start?

These may require password
https://mega.nz/#!cb4wzLbD!ug1BqwMfuzEv6...6X9K2g3OOc
https://mega.nz/#!hNEjnYyZ!dcZwaCqJRYJ_I...ghyA4hN_Ao (if applicable ,password=www.freemobilefirmware.com)

thanks for response emmanus.
actually i flashed these phone with a dooge x10 firmware that bricked the phone and it currently doesnt accept file.
i want to revive these phone back to life as it does not display anymore.
it was hanging on logo initially before flash.

[xerxes]

What is wrong with the device?
How did the issue start?

These may require password
https://mega.nz/#!cb4wzLbD!ug1BqwMfuzEv6...6X9K2g3OOc
https://mega.nz/#!hNEjnYyZ!dcZwaCqJRYJ_I...ghyA4hN_Ao (if applicable ,password=www.freemobilefirmware.com)

thanks for response emmanus.
actually i flashed these phone with a dooge x10 firmware that bricked the phone and it currently doesnt accept file.
i want to revive these phone back to life as it does not display anymore.
it was hanging on logo initially before flash.

Did you backup the phone's firmware or take note of the phone's original build no. before flashing it?
Does your PC still detect the phone? If yes, what error does sp flash throw when you're trying to flash another firmware?

Sent from my M5 mini using Hovatek Mobile

[EMMANUS]

From what I've discovered about that model, I think it has secure boot (not sure) so, no matter what you do, do not format the phone.
Try the files on the two links I posted.


State the tools you have at your disposal.

[X3non]

thanks for response emmanus.
actually i flashed these phone with a dooge x10 firmware that bricked the phone and it currently doesnt accept file.
i want to revive these phone back to life as it does not display anymore.
it was hanging on logo initially before flash.

the phone is totally dead after flashing the X10 firmware?
if yes, did you disconnect / reconnect the battery of the phone?

[Emmy Chizzy112]

What is wrong with the device?
How did the issue start?

These may require password
https://mega.nz/#!cb4wzLbD!ug1BqwMfuzEv6...6X9K2g3OOc
https://mega.nz/#!hNEjnYyZ!dcZwaCqJRYJ_I...ghyA4hN_Ao (if applicable ,password=www.freemobilefirmware.com)

thanks for response emmanus.
actually i flashed these phone with a dooge x10 firmware that bricked the phone and it currently doesnt accept file.
i want to revive these phone back to life as it does not display anymore.
it was hanging on logo initially before flash.

Did you backup the phone's firmware or take note of the phone's original build no. before flashing it?
Does your PC still detect the phone? If yes, what error does sp flash throw when you're trying to flash another firmware?

Sent from my M5 mini using Hovatek Mobile

I didnt backup the firmware but these is the build number [BUILD NUMBER VO JL50030-24 2017/10/19 A3]
the pc still dictates the phone sir and it shows DA HASH MISMATCH MISMATCH on another firmware and CHIP ID MISMATCH on another firmware.

[Emmy Chizzy112]

thanks for response emmanus.
actually i flashed these phone with a dooge x10 firmware that bricked the phone and it currently doesnt accept file.
i want to revive these phone back to life as it does not display anymore.
it was hanging on logo initially before flash.

the phone is totally dead after flashing the X10 firmware?
if yes, did you disconnect / reconnect the battery of the phone?

yes its totally dead but pc dictates it.
its not an inbuilt battery as i have disconnected and reconnected the battery

[EMMANUS]

You said it does not accept file. Explain.
If it gives an error, state the error and the tool.

[Emmy Chizzy112]

From what I've discovered about that model, I think it has secure boot (not sure) so, no matter what you do, do not format the phone.
Try the files on the two links I posted.


State the tools you have at your disposal.

thanks.
i have flashed both firmware and it shows CHIP ID MISMATCH in sp flash tool