[damosco]

Hi all please help me i have 1 TECNO F1 that custumer try to remove FRP himself and formatted it with SP FLASHTOOL.
Now phone is detected by PC and can be flash with INFERNO TOOL. I downloaded TECNO F1 file listed for this model and flashed it with INFERNO TOOL;same condition not power but detect by PC.
If someone have another FIRMWARE for this phone

TECNO F1 8+1 E1
Android 8.1 mt6580
Thank to all

[X3non]

Hi all please help me i have 1 TECNO F1 that custumer try to remove FRP himself and formatted it with SP FLASHTOOL.
Now phone is detected by PC and can be flash with INFERNO TOOL. I downloaded TECNO F1 file listed for this model and flashed it with INFERNO TOOL;same condition not power but detect by PC.
If someone have another FIRMWARE for this phone

TECNO F1 8+1 E1
Android 8.1 mt6580
Thank to all

have you tried disconnecting / reconnecting the battery of the device?
do you know if the owner of the phone still remembers the original build number?

[damosco]

Hi thank for your reply unfortunetly he didn't remember the built number. I try to power on it with others batteries .

Hi all please help me i have 1 TECNO F1 that custumer try to remove FRP himself and formatted it with SP FLASHTOOL.
Now phone is detected by PC and can be flash with INFERNO TOOL. I downloaded TECNO F1 file listed for this model and flashed it with INFERNO TOOL;same condition not power but detect by PC.
If someone have another FIRMWARE for this phone

TECNO F1 8+1 E1
Android 8.1 mt6580
Thank to all

have you tried disconnecting / reconnecting the battery of the device?
do you know if the owner of the phone still remembers the original build number?

[X3non]

Hi thank for your reply unfortunetly he didn't remember the built number. I try to power on it with others batteries .

no build number means it down to trial and errors.
you can try the other F1 rom build listed @ https://www.hovatek.com/forum/thread-26041.html

[xerxes]

Hi thank for your reply unfortunetly he didn't remember the built number. I try to power on it with others batteries .

Hi all please help me i have 1 TECNO F1 that custumer try to remove FRP himself and formatted it with SP FLASHTOOL.
Now phone is detected by PC and can be flash with INFERNO TOOL. I downloaded TECNO F1 file listed for this model and flashed it with INFERNO TOOL;same condition not power but detect by PC.
If someone have another FIRMWARE for this phone

TECNO F1 8+1 E1
Android 8.1 mt6580
Thank to all

have you tried disconnecting / reconnecting the battery of the device?
do you know if the owner of the phone still remembers the original build number?

That means you still need to try different firmware.
Have you tried all the firmware listed @ https://www.hovatek.com/forum/thread-26041.html ?
Also note that, you'll need to always disconnect/reconnect the phone's battery after flashing, before powering up the phone.

Sent from my M5 mini using Hovatek Mobile

[Uforo]

I have same issue, please any way out?

[X3non]

I have same issue, please any way out?

this is someone's thread, create a new thread for your device issue by clicking "Ask Question" at the top