[henrybright]

Good morning guys, 
 I'm trying to flash my TecbTecno L9 but it has not been possible, the flashtool is popping up an error message attached to this thread. The phone keeps rebooting.

[henrybright]

Here is a photo of the error message.

[EMMANUS]

Post the image on imgur and paste the link here

[henrybright]

This is the link to the image 
http://imgur.com/WuMtATW

[henrybright]

Post the image on imgur and paste the link here

http://imgur.com/WuMtATW

[X3non]

This is the link to the image 
http://imgur.com/WuMtATW

do you remember the build number of your phone?

[henrybright]

This is the link to the image 
http://imgur.com/WuMtATW

do you remember the build number of your phone?

No, I do not remember the build number .

[EMMANUS]

Have you tried another version of SP flash tool?
You said that the phone reboots. Are you sure it was off before you plugged it in for flashing?

[henrybright]

Have you tried another version of SP flash tool?
You said that the phone reboots. Are you sure it was off before you plugged it in for flashing?

It was off but when you I plug it for flashing, it will keep trying to reboot. Same thing happens when you try to plug it for charge. About using a different version of flash tool, yes I did try a different version.

[EMMANUS]

For the flash to work properly, the phone must be off.
You have to open the phone for the next step, which involves flashing with battery disconnected.
If you cannot open the phone without causing damage to parts, I suggest you take it to a technician to open it for you.