Join us on Tl   Wh

Hovatek Forum MOBILE Android [Please help] Geotel G1 dead after update fail in service center

[Please help] Geotel G1 dead after update fail in service center

[Please help] Geotel G1 dead after update fail in service center

Pages (4): 1 2 3 4 Next
claudiuro
claudiuro
claudiuro
Junior Member
18
04-02-2019, 09:40 PM
#1



hy, I need help with Geotel G1.
After a virus, i thing, the phone was to a service center and there , they try to reinstall all, i guess, but they cant doit.
The phone not boot and stay in bootlop only with logo geotel.
I take it and i try to reinstall , i use all firmware anothe post with geotel ,  but no success. Now the phone is recognized by the computer , but there is no image on the screen, no logo, no nothing. please help me to repair.

scuse my english.

Many thanks
This post was last modified: 05-02-2019, 07:01 AM by claudiuro.
shankar1790
shankar1790
shankar1790
Senior Member
474
04-02-2019, 11:01 PM
#2
Have you remembere your phone build no before sending it to service centre.I think they (you too)flashed incompatible preloader to your device.Is there any error comes when you try to flash other firmware to your device
This post was last modified: 04-02-2019, 11:04 PM by shankar1790.
claudiuro
claudiuro
claudiuro
Junior Member
18
04-02-2019, 11:22 PM
#3
Tnx for answare . I dont know firmware version before sending to service. And i dont thing they know that. What can i do?


Sent from my iPhone using Tapatalk
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
05-02-2019, 07:14 AM
#4
Do you know anybody with the same device around you?

If you do, you can backup the firmware and flash to your own device.
claudiuro
claudiuro
claudiuro
Junior Member
18
05-02-2019, 07:29 AM
#5



Unfortunately, I do not know anyone with the same device ....
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
05-02-2019, 07:33 AM
#6
You stated here https://www.hovatek.com/forum/thread-253...#pid160142 that you've tried all the roms on that thread.

How many did you download and what did you get after flashing each one?
This post was last modified: 05-02-2019, 07:34 AM by EMMANUS.
claudiuro
claudiuro
claudiuro
Junior Member
18
05-02-2019, 07:43 AM
#7
GEOTEL_G1_V1.0_20171019.zip
GEOTEL_G1_V1.0_20171220.zip
GEOTEL_G1_V1.0_20171228.zip
GEOTEL_G1_V1.0_20190111.zip

after flashing , same answare: flash ok, nothing on screen phone, phone recognized by pc

this ftp address not work on me.....
Other firmware builds
ftp.ftp.xchengtech.com
user: Xchengtech_geotel
pass: Xchengtech_geotel_A0084
This post was last modified: 05-02-2019, 07:44 AM by claudiuro.
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
05-02-2019, 07:58 AM
#8
Follow this carefully and respond

Flash only preloader from each of the 4 firmwares you have.
After flashing each preloader, open device manager on your PC, just connect your phone to PC without doing any other thing, and see if your phone is recognized as "MTK usb Port" or "Mediatek Preloader xxxxxxxx".
claudiuro
claudiuro
claudiuro
Junior Member
18
05-02-2019, 08:55 AM
#9
I flash only preloader
after I removed the battery, then I put it back. I connected to the pc
I use usbdeview and there first appear "MT65xx Preloader MediaTek PreLoader USB VCOM (Android) " - COM14 and disappear an then appear "Port_#0001.Hub_#0001 MediaTek USB Port" - COM 53 and keep it in the loop
claudiuro
claudiuro
claudiuro
Junior Member
18
05-02-2019, 08:58 AM
#10
when i use SP_Flash_Tool_v5.1844_Win it flash on COM 14 and when i use SP_MDT_v3.1828 it flash on COM 53
Pages (4): 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt