hy, I need help with Geotel G1.
After a virus, i thing, the phone was to a service center and there , they try to reinstall all, i guess, but they cant doit.
The phone not boot and stay in bootlop only with logo geotel.
I take it and i try to reinstall , i use all firmware anothe post with geotel , but no success. Now the phone is recognized by the computer , but there is no image on the screen, no logo, no nothing. please help me to repair.
scuse my english.
Many thanks
This post was last modified: 05-02-2019, 07:01 AM by claudiuro.
Have you remembere your phone build no before sending it to service centre.I think they (you too)flashed incompatible preloader to your device.Is there any error comes when you try to flash other firmware to your device
This post was last modified: 04-02-2019, 11:04 PM by shankar1790.
Flash only preloader from each of the 4 firmwares you have.
After flashing each preloader, open device manager on your PC, just connect your phone to PC without doing any other thing, and see if your phone is recognized as "MTK usb Port" or "Mediatek Preloader xxxxxxxx".
I flash only preloader
after I removed the battery, then I put it back. I connected to the pc
I use usbdeview and there first appear "MT65xx Preloader MediaTek PreLoader USB VCOM (Android) " - COM14 and disappear an then appear "Port_#0001.Hub_#0001 MediaTek USB Port" - COM 53 and keep it in the loop
