Tecno Y6 Flash tool Message

[Please help] Tecno Y6 Flash tool Message

17

04-02-2019, 05:11 PM

#1

Hi dear members,
This forum always helps us all.
I'm back again for a Tecno Y6 flashing error message.
I've downloaded more than 4 firmware. From Hovatec 2 and from needrom 2.
All of them are good when analysing them with the scatter analyser.
Unfortunately when flashing, I can get this message.
See the image in attachment file please.
I have even applied most of the solution provided by Hovatek but no success.

So please, can anyone help me?
Thanks for all

EMMANUS
Senior Member

1,677

04-02-2019, 07:12 PM

#2

You did not attach any images.
Post the images on any cloud storage site, and share the link here.

hovatek
Administrator

49,753

05-02-2019, 10:58 AM

#3

(04-02-2019, 05:11 PM)ChristianPierre Hi dear members,
This forum always helps us all.
I'm back again for a Tecno Y6 flashing error message.
I've downloaded more than 4 firmware. From Hovatec 2 and from needrom 2.
All of them are good when analysing them with the scatter analyser.
Unfortunately when flashing, I can get this message.
See the image in attachment file please.
I have even applied most of the solution provided by Hovatek but no success.

So please, can anyone help me?
Thanks for all

upload the screenshot to imgur.com
what is wrong with your Y6 and how did the problem begin?
what's the current state of the phone? (totally dead or stuck at boot)
do you remember the build number? and have you been able to successfully flash any firmware onto the device?

ChristianPierre
Junior Member

17

06-02-2019, 08:50 AM

#4

(04-02-2019, 07:12 PM)EMMANUS You did not attach any images.
Post the images on any cloud storage site, and share the link here.

Please, here is the link for the image on the message I get when try flashing. The phone can't boot .
https://imgur.com/a/EpP4Czv

ChristianPierre
Junior Member

17

06-02-2019, 08:55 AM

#5

(05-02-2019, 10:58 AM)X3non
(04-02-2019, 05:11 PM)ChristianPierre Hi dear members,
This forum always helps us all.
I'm back again for a Tecno Y6 flashing error message.
I've downloaded more than 4 firmware. From Hovatec 2 and from needrom 2.
All of them are good when analysing them with the scatter analyser.
Unfortunately when flashing, I can get this message.
See the image in attachment file please.
I have even applied most of the solution provided by Hovatek but no success.

So please, can anyone help me?
Thanks for all

upload the screenshot to imgur.com
what is wrong with your Y6 and how did the problem begin?
what's the current state of the phone? (totally dead or stuck at boot)
do you remember the build number? and have you been able to successfully flash any firmware onto the device?

Here is the link for the message I get when try flashing .
https://imgur.com/a/EpP4Czv
The phone is not powering up, no sign but it is recognised by the computer and the flash tool.

hovatek
Administrator

49,753

06-02-2019, 10:18 AM

#6

(06-02-2019, 08:55 AM)ChristianPierre Here is the link for the message I get when try flashing .
https://imgur.com/a/EpP4Czv
The phone is not powering up, no sign but it is recognised by the computer and the flash tool.

you didn't tell how the phone became totally dead in the first place
try use latest version @ https://www.hovatek.com/forum/thread-13970.html
if you still get the same error, format the phone using the format tab then flash the firmware using download tab

hovatek
Administrator

49,753

08-02-2019, 11:06 PM

#7

(06-02-2019, 08:55 AM)ChristianPierre Here is the link for the message I get when try flashing .
https://imgur.com/a/EpP4Czv
The phone is not powering up, no sign but it is recognised by the computer and the flash tool.

Hope you're not holding any button when connecting to PC for flashing

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions