Hovatek Forum MOBILE Android [Please help] camon cx stuck on phiz recovery
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] camon cx stuck on phiz recovery

[Please help] camon cx stuck on phiz recovery

Pages (2): 1 2 Next
Ivanovish
Ivanovish
Ivanovish
Junior Member
17
01-02-2019, 07:46 AM
#1



After trying to restore my phone to factory... via phone settings on boot up it cant go.beyond recovery menu...what should i do?
shankar1790
shankar1790
shankar1790
Senior Member
474
01-02-2019, 07:52 AM
#2
(01-02-2019, 07:46 AM)Ivanovish After trying to restore my phone to factory... via phone settings on boot up it cant go.beyond recovery menu...what should i do?

Please stop creating duplicate thread for same issue
shankar1790
shankar1790
shankar1790
Senior Member
474
01-02-2019, 08:03 AM
#3
(01-02-2019, 07:46 AM)Ivanovish After trying to restore my phone to factory... via phone settings on boot up it cant go.beyond recovery menu...what should i do?
Well do you have its stock recovery???
shankar1790
shankar1790
shankar1790
Senior Member
474
01-02-2019, 08:05 AM
#4
Try wiping data ,cache &dalvik then switch off your device and restart
shankar1790
shankar1790
shankar1790
Senior Member
474
01-02-2019, 08:08 AM
#5



If the same issue persist-
Try this quick fix -flash back your stock recovery then reboot.
After successfully reset flash your custom recovery again
Ivanovish
Ivanovish
Ivanovish
Junior Member
17
01-02-2019, 09:39 AM
#6
my build number
CX-H510DEFG-N-171109V159
CHIPSET: MT6750T

MY WORRY IS I HAD ERASED EVERYTHING WHEN I WAS TRYING TO RESTORE TO FACTORY NOW USB DEBUGING IS INACTIVE I GUESS.

WHEN I PUT IT IN FASTBOOT AND CHECK FOR FASTBOOT DEVICES IN ADB COMMAND ITS NOT LISTED.
WILL SP FLASH TOOPS DETECT IT AND WHAT PARTITION DO I NEED TO FLASH.?

DO I NEED TO DOWNLOAD THE ENTIRE STOCK ROM OR THE PARTICULAR PARTITION AND SCARTER?
X3non
X3non
X3non
Recognized Contributor
22,062
01-02-2019, 10:19 AM
#7
(01-02-2019, 09:39 AM)Ivanovish my build number
CX-H510DEFG-N-171109V159
CHIPSET: MT6750T

MY WORRY IS I HAD ERASED EVERYTHING WHEN I WAS TRYING TO RESTORE TO FACTORY NOW USB DEBUGING IS INACTIVE I GUESS.

WHEN I PUT IT IN FASTBOOT AND CHECK FOR FASTBOOT DEVICES IN ADB COMMAND ITS NOT LISTED.
WILL SP FLASH TOOPS DETECT IT AND WHAT PARTITION DO I NEED TO FLASH.?

DO I NEED TO DOWNLOAD THE ENTIRE STOCK ROM OR THE PARTICULAR PARTITION AND SCARTER?


fastboot? try the detection fix @ https://www.hovatek.com/forum/thread-17105.html then try wiping the phone in fastboot
Code:

fastboot -w

if it doesn't work, flash stock recovery, boot and system.img using SP flash tool
shankar1790
shankar1790
shankar1790
Senior Member
474
01-02-2019, 10:40 AM
#8
(01-02-2019, 09:39 AM)Ivanovish my build number
CX-H510DEFG-N-171109V159
CHIPSET: MT6750T

MY WORRY IS I HAD ERASED EVERYTHING WHEN I WAS TRYING TO RESTORE TO FACTORY NOW USB DEBUGING IS INACTIVE I GUESS.

WHEN I PUT IT IN FASTBOOT AND CHECK FOR FASTBOOT DEVICES IN ADB COMMAND ITS NOT LISTED.
WILL SP FLASH TOOPS DETECT IT AND WHAT PARTITION DO I NEED TO FLASH.?

DO I NEED TO DOWNLOAD THE ENTIRE STOCK ROM OR THE PARTICULAR PARTITION AND SCARTER?

If you choose factory reset in phone setting it send commands to wipe (data,cache,dalvikcahe) in recovery mode and it automatically did . If you did nothing in custom recovery like erasing any partition, (system etc)then the fastboot method defently work.
Try to fix fastboot mode and try to use command *fastboot -w* as **x3non**suggested 
This command wipe your userdata means factory reset
I did fix this issue by flashing only my stock recovery because my phone automatically booted in recovery even i tried to boot fastboot using keys but it always booted to recovery mode
hovatek
hovatek
hovatek
Administrator
49,570
02-02-2019, 08:43 AM
#9
(01-02-2019, 09:39 AM)Ivanovish my build number
CX-H510DEFG-N-171109V159
CHIPSET: MT6750T

MY WORRY IS I HAD ERASED EVERYTHING WHEN I WAS TRYING TO RESTORE TO FACTORY NOW USB DEBUGING IS INACTIVE I GUESS.

WHEN I PUT IT IN FASTBOOT AND CHECK FOR FASTBOOT DEVICES IN ADB COMMAND ITS NOT LISTED.
WILL SP FLASH TOOPS DETECT IT AND WHAT PARTITION DO I NEED TO FLASH.?

DO I NEED TO DOWNLOAD THE ENTIRE STOCK ROM OR THE PARTICULAR PARTITION AND SCARTER?

If you had rooted using supersu or magisk then reflash the zip in Philz recovery and reboot.
If that doesn't work then download the firmware for CX-H501DEFG-N-171109V159 (I believe you made a typo) from https://www.hovatek.com/forum/thread-19410.html and flash using sp flash tool guide @ https://www.hovatek.com/forum/thread-159.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Ivanovish
Ivanovish
Ivanovish
Junior Member
17
03-02-2019, 12:18 AM
#10



I would wish to extend my sincere appreciations to all of you for your suggetions... And immediate response when u heard my cry about my phone

I take this opprtunity to let u know that my phone is back to live after... Reading whatever suggetion @ one had to give.

I was was able to resurrect it by downloading the scater file & only recovery img which I flashed using so flash tool.

The only set back is it removed my root access... & now I fear to root since it may bring the same scenario on restoration to factory... But thx once again ...
https://www.hovatek.com/forum/user-1116.html
https://www.hovatek.com/forum/user-67607.html https://www.hovatek.com/forum/user-1.html without you Guys I wouldn't have made it.

I just want to create another thread about my sister's c9 which looped on tecno boot up logo..
NB. I don't know it's build number...
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram