Wrr mtk tool+ sp flash tool to back up infinix note 5
Wrr mtk tool+ sp flash tool to back up infinix note 5
(09-01-2019, 02:15 PM)jdalijohn While backing up infinix note 5, after read back for the whole rom, i upload it on wwr tool i did not receive an prompting to add preloader file, the button to build firmware is inactive.
(09-01-2019, 08:57 PM)EMMANUS Check your steps again.While doing memory test it was only DRam test that was available to i had to create PGDT according to this post
You should have 2 read backs , one is Emmc Boot, the other Emmc User.
From the image you posted, you loaded Rom_2 twice, which is not right .
I suggest you start over, and fully understand each step before you proceed .
(09-01-2019, 11:07 PM)innagee(09-01-2019, 02:15 PM)jdalijohn While backing up infinix note 5, after read back for the whole rom, i upload it on wwr tool i did not receive an prompting to add preloader file, the button to build firmware is inactive.
Use the latest version 2.40
Sent from my M5 mini using Hovatek Mobile
(10-01-2019, 07:16 AM)EMMANUS Note that you are to take a value from here https://www.hovatek.com/forum/thread-22701.html to perform a readback of EMMC User.
After using https://www.hovatek.com/forum/thread-22701.html for step 17 (to obtain the length needed to make a full ROM dump), you have to return to the steps here https://www.hovatek.com/forum/thread-21970.html and continue from 18.
(10-01-2019, 11:08 AM)jdalijohn I repeated as you stated i still have the result
(10-01-2019, 11:36 AM)X3non(10-01-2019, 11:08 AM)jdalijohn I repeated as you stated i still have the result
i believe you have emmc_boot and emmc_user dumps ready
load emmc_user dump which is rom2 like you did here @ https://www.hovatek.com/forum/attachment.php?aid=6003
then switch to the scatter file tab > expand "cut the rom"
if its active then select and use it
then load the emmc_boot dump
switch to preloader tab > preloader analysis > to extract preloader and save...
BUT if 'cut the rom' is not active, then you will need to manually cut the rom
lets know the outcome and if there's need to manually cut the rom
(11-01-2019, 12:40 AM)jdalijohn Wow i was able to cut the ROM, but the scatter file is missing how do I generate scatter file for what I just cut
