X506

jdfm
Senior Member

304

08-01-2019, 03:21 AM

#1

Hello team hovatek and wishing you a happy new year. I have 2 x506 one working and the other one bricked. I have tried to to flash a firmware to the bricked phone but i keep getting usb device not recognized though it charges and i have changed usb ports a couple of time and still the same but the system recognizes the other one hence not driver or usb cable issue. Is there a work around to by cut the usb and solder directly to the mother board so as the system could recognize it? Thanks in advance!!!

freshtyt
Senior Member

2,949

08-01-2019, 10:38 AM

#2

(08-01-2019, 03:21 AM)jdfm Hello team hovatek and wishing you a happy new year. I have 2 x506 one working and the other one bricked. I have tried to to flash a firmware to the bricked phone but i keep getting usb device not recognized though it charges and i have changed usb ports a couple of time and still the same but the system recognizes the other one hence not driver or usb cable issue. Is there a work around to by cut the usb and solder directly to the mother board so as the system could recognize it? Thanks in advance!!!

its likely the USB port on that phone is faulty. either its not been replaced properly or its been replaced with another faulty port
try the guide at https://www.hovatek.com/forum/thread-14135.html

EMMANUS
Senior Member

1,677

09-01-2019, 07:25 AM

#3

What is the condition of the bricked device? Does it come on at all?

jdfm
Senior Member

304

09-01-2019, 10:15 AM

#4

@Emmanus it comes on stays on infinix then goes off. I flashed a custom rom on it (marshmallow rom) and did not like it so i opted to flash lollipop but something went wrong hence it got bricked.

maxpayne
Intern

3,836

09-01-2019, 03:48 PM

#5

(08-01-2019, 03:21 AM)jdfm Hello team hovatek and wishing you a happy new year. I have 2 x506 one working and the other one bricked. I have tried to to flash a firmware to the bricked phone but i keep getting usb device not recognized though it charges and i have changed usb ports a couple of time and still the same but the system recognizes the other one hence not driver or usb cable issue. Is there a work around to by cut the usb and solder directly to the mother board so as the system could recognize it? Thanks in advance!!!

The battery might be drained. Encountered something similar on an Infinix Zero

Sent from my Infinix X510 using Hovatek Mobile

EMMANUS
Senior Member

1,677

09-01-2019, 08:52 PM

#6

If you take out battery as the problem after testing, I think you should consider both cable and your phone port as culprits.

If you're convinced that it's the port, you have to meet a hardware repairs technician, or, if you're one, Google for the schematics and connections.

jdfm
Senior Member

304

12-01-2019, 12:45 AM

#7

Definitely not the battery but will ASAP. will take it to a tech to help check the port...will give feedback ASAP, THANKS!!!

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions